Der Ärger-Thread...

[wegomyway]

@ctrlaltdelete, nur ausgelesen, KEIN Test (im Aufgabenplaner liegt das Script zum auslesen deaktiviert drin). Die beiden WD-HDDs sind ja seit 10/2024 verbaut:

-------------------------------------------------------------------------------

Health status of internal HDD's:

-------------------------------------------------------------------------------

Drive /dev/sata1:

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red (CMR)
Device Model:     WDC WD80EFPX-68C4ZN0
Firmware Version: 81.00A81
User Capacity:    8,001,563,222,016 bytes [8.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5640 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Mar 26 19:53:29 2026 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Error Log Version: 1
No Errors Logged

 ID  | Attribute                         | (1) | (2) | (3) | (4)
=====|===================================|=====|=====|=====|===================
 1   | Raw_Read_Error_Rate               | 200 | 200 | 051 | 0 <!
 3   | Spin_Up_Time                      | 185 | 185 | 021 | 7725 <!
 4   | Start_Stop_Count                  | 100 | 100 | 000 | 546
 5   | Reallocated_Sector_Ct             | 200 | 200 | 140 | 0 <!
 7   | Seek_Error_Rate                   | 200 | 200 | 000 | 0
 9   | Power_On_Hours                    | 088 | 088 | 000 | 9486
 10  | Spin_Retry_Count                  | 100 | 100 | 000 | 0
 11  | Calibration_Retry_Count           | 100 | 100 | 000 | 0
 12  | Power_Cycle_Count                 | 100 | 100 | 000 | 546
 192 | Power-Off_Retract_Count           | 200 | 200 | 000 | 2
 193 | Load_Cycle_Count                  | 200 | 200 | 000 | 543
 194 | Temperature_Celsius               | 119 | 113 | 000 | 33
 196 | Reallocated_Event_Count           | 200 | 200 | 000 | 0
 197 | Current_Pending_Sector            | 200 | 200 | 000 | 0
 198 | Offline_Uncorrectable             | 100 | 253 | 000 | 0
 199 | UDMA_CRC_Error_Count              | 200 | 200 | 000 | 0
 200 | Multi_Zone_Error_Rate             | 100 | 253 | 000 | 0

 (1) Value, (2) Worst, (3) Threshold, (4) Raw, <! Pre-fail value
-------------------------------------------------------------------------------

Drive /dev/sata2:

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red (CMR)
Device Model:     WDC WD80EFPX-68C4ZN0
Firmware Version: 81.00A81
User Capacity:    8,001,563,222,016 bytes [8.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5640 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Mar 26 19:53:29 2026 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Error Log Version: 1
No Errors Logged

 ID  | Attribute                         | (1) | (2) | (3) | (4)
=====|===================================|=====|=====|=====|===================
 1   | Raw_Read_Error_Rate               | 200 | 200 | 051 | 0 <!
 3   | Spin_Up_Time                      | 188 | 188 | 021 | 7600 <!
 4   | Start_Stop_Count                  | 100 | 100 | 000 | 546
 5   | Reallocated_Sector_Ct             | 200 | 200 | 140 | 0 <!
 7   | Seek_Error_Rate                   | 200 | 200 | 000 | 0
 9   | Power_On_Hours                    | 088 | 088 | 000 | 9487
 10  | Spin_Retry_Count                  | 100 | 100 | 000 | 0
 11  | Calibration_Retry_Count           | 100 | 100 | 000 | 0
 12  | Power_Cycle_Count                 | 100 | 100 | 000 | 546
 192 | Power-Off_Retract_Count           | 200 | 200 | 000 | 2
 193 | Load_Cycle_Count                  | 200 | 200 | 000 | 543
 194 | Temperature_Celsius               | 119 | 114 | 000 | 33
 196 | Reallocated_Event_Count           | 200 | 200 | 000 | 0
 197 | Current_Pending_Sector            | 200 | 200 | 000 | 0
 198 | Offline_Uncorrectable             | 100 | 253 | 000 | 0
 199 | UDMA_CRC_Error_Count              | 200 | 200 | 000 | 0
 200 | Multi_Zone_Error_Rate             | 100 | 253 | 000 | 0

 (1) Value, (2) Worst, (3) Threshold, (4) Raw, <! Pre-fail value
-------------------------------------------------------------------------------

 

[ctrlaltdelete]

Was ich jetzt auf dem Handy gesehen habe, sind die alle ok. Test braucht es nicht.

 

[Mavalok2]

SMART overall-health self-assessment test result: PASSED

Sagt eigentlich schon recht viel. Aber auch 0 bei "Reallocated Event Count" und "Current Pending Sector" bei beiden Festplatten. Oft sieht man hier erste Anzeichen von Problemen.