- Mitglied seit
- 17. Apr 2013
- Beiträge
- 8.465
- Punkte für Reaktionen
- 983
- Punkte
- 268
Kann bitte jemand von euch auch nchmals kurz hier nachschauen ob wirklich alles OK mit der HW?
Ich hatte wohl vor 6 MOnaten Data Scrubing alle 6 MOnate scheduled. Das war heute Mitternacht und da ist die Kiste, eine RS822+ gleich ziemlich verwirrt. Hat die Platte 4 aus dem Pool geschmissen und sonst alles mögliche veranstalltet, habe viele Alarm Mails erhalten und es wurde mir berichtet 'es piept'
Habe nun Scrub abgestellt und mache gerade Repair, wirklich defekt scheint für mich nichts zu sein?
Ich hatte wohl vor 6 MOnaten Data Scrubing alle 6 MOnate scheduled. Das war heute Mitternacht und da ist die Kiste, eine RS822+ gleich ziemlich verwirrt. Hat die Platte 4 aus dem Pool geschmissen und sonst alles mögliche veranstalltet, habe viele Alarm Mails erhalten und es wurde mir berichtet 'es piept'
Habe nun Scrub abgestellt und mache gerade Repair, wirklich defekt scheint für mich nichts zu sein?
Code:
smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HAT3300
Device Model: Synology HAT3300-8T
Serial Number: ZPV01BPY
LU WWN Device Id: 5 000c50 0e6db5d93
Firmware Version: PL01
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon May 6 11:44:00 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 897) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Error_Rate 0x000f 082 064 006 Pre-fail Always - 151935083
3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0
4 Start/Stop_Count 0x0032 100 100 020 Old_age Always - 13
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 077 060 045 Pre-fail Always - 48356292
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 6002
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Drive_Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 12
183 PHY_Counter_Events 0x0032 100 100 000 Old_age Always - 0
184 Reported_IOEDC_Errors 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrectables 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeouts 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature 0x0022 055 054 040 Old_age Always - 45 (Min/Max 44/45)
191 Shock_Count 0x0032 100 100 000 Old_age Always - 0
192 Emergency_Retract_Count 0x0032 100 100 000 Old_age Always - 238
193 Load/Unload_Count 0x0032 100 100 000 Old_age Always - 266
194 Temperature 0x0022 045 046 000 Old_age Always - 45 (0 28 0 0 0)
195 ECC_On_the_Fly_Count 0x001a 082 064 000 Old_age Always - 151935083
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Uncorrectable_Sectors_Count 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flight_Hours 0x0000 100 253 000 Old_age Offline - 180135223367529
241 Lifetime_Writes_From_host 0x0000 100 253 000 Old_age Offline - 8126456786
242 Lifetime_Reads_From_Host 0x0000 100 253 000 Old_age Offline - 135342678882
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HAT3300
Device Model: Synology HAT3300-8T
Serial Number: ZPV01BQB
LU WWN Device Id: 5 000c50 0e6db5f17
Firmware Version: PL01
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon May 6 11:44:01 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 899) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Error_Rate 0x000f 082 064 006 Pre-fail Always - 149839386
3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0
4 Start/Stop_Count 0x0032 100 100 020 Old_age Always - 12
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 077 060 045 Pre-fail Always - 48595657
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 6002
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Drive_Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 12
183 PHY_Counter_Events 0x0032 100 100 000 Old_age Always - 0
184 Reported_IOEDC_Errors 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrectables 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeouts 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature 0x0022 058 056 040 Old_age Always - 42 (Min/Max 41/42)
191 Shock_Count 0x0032 100 100 000 Old_age Always - 0
192 Emergency_Retract_Count 0x0032 100 100 000 Old_age Always - 229
193 Load/Unload_Count 0x0032 100 100 000 Old_age Always - 267
194 Temperature 0x0022 042 044 000 Old_age Always - 42 (0 28 0 0 0)
195 ECC_On_the_Fly_Count 0x001a 082 064 000 Old_age Always - 149839386
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Uncorrectable_Sectors_Count 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flight_Hours 0x0000 100 253 000 Old_age Offline - 5712306509673
241 Lifetime_Writes_From_host 0x0000 100 253 000 Old_age Offline - 8129886495
242 Lifetime_Reads_From_Host 0x0000 100 253 000 Old_age Offline - 126748312762
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HAT3300
Device Model: Synology HAT3300-8T
Serial Number: ZPV01E70
LU WWN Device Id: 5 000c50 0e6cfa16d
Firmware Version: PL01
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon May 6 11:44:01 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 897) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Error_Rate 0x000f 083 064 006 Pre-fail Always - 186074845
3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0
4 Start/Stop_Count 0x0032 100 100 020 Old_age Always - 13
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 077 060 045 Pre-fail Always - 48704367
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 6002
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Drive_Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 12
183 PHY_Counter_Events 0x0032 100 100 000 Old_age Always - 0
184 Reported_IOEDC_Errors 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrectables 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeouts 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature 0x0022 057 056 040 Old_age Always - 43 (Min/Max 42/43)
191 Shock_Count 0x0032 100 100 000 Old_age Always - 0
192 Emergency_Retract_Count 0x0032 100 100 000 Old_age Always - 232
193 Load/Unload_Count 0x0032 100 100 000 Old_age Always - 266
194 Temperature 0x0022 043 044 000 Old_age Always - 43 (0 28 0 0 0)
195 ECC_On_the_Fly_Count 0x001a 083 064 000 Old_age Always - 186074845
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Uncorrectable_Sectors_Count 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flight_Hours 0x0000 100 253 000 Old_age Offline - 14358075676521
241 Lifetime_Writes_From_host 0x0000 100 253 000 Old_age Offline - 8132129154
242 Lifetime_Reads_From_Host 0x0000 100 253 000 Old_age Offline - 122513728810
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HAT3300
Device Model: Synology HAT3300-8T
Serial Number: ZPV01BPT
LU WWN Device Id: 5 000c50 0e6db5571
Firmware Version: PL01
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon May 6 11:44:01 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 905) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Error_Rate 0x000f 082 064 006 Pre-fail Always - 151962967
3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0
4 Start/Stop_Count 0x0032 100 100 020 Old_age Always - 13
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 077 060 045 Pre-fail Always - 48528197
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 6002
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Drive_Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 12
183 PHY_Counter_Events 0x0032 100 100 000 Old_age Always - 0
184 Reported_IOEDC_Errors 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrectables 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeouts 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature 0x0022 055 054 040 Old_age Always - 45 (Min/Max 44/45)
191 Shock_Count 0x0032 100 100 000 Old_age Always - 0
192 Emergency_Retract_Count 0x0032 100 100 000 Old_age Always - 231
193 Load/Unload_Count 0x0032 100 100 000 Old_age Always - 265
194 Temperature 0x0022 045 046 000 Old_age Always - 45 (0 28 0 0 0)
195 ECC_On_the_Fly_Count 0x001a 082 064 000 Old_age Always - 151962967
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Uncorrectable_Sectors_Count 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flight_Hours 0x0000 100 253 000 Old_age Offline - 236403589912425
241 Lifetime_Writes_From_host 0x0000 100 253 000 Old_age Offline - 8135393522
242 Lifetime_Reads_From_Host 0x0000 100 253 000 Old_age Offline - 143939088056
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.