- Mitglied seit
- 12. Feb 2013
- Beiträge
- 158
- Punkte für Reaktionen
- 1
- Punkte
- 18
Hallo,
heute brauche ich mal wieder Euren fachkundigen Rat. Vielleicht liest ja auch Frank mit, der mir bei der Einrichtung des VPN so prima geholfen hat.
Übrigens klappt es auch jetzt mit der Einbindung der freigegebenen Ordner.
Nun wollte ich mich ein Stück weiter bewegen und OpenVPN einrichten, da es ja etwa sicherer sein soll.
Ich habe die Anleitung von Matthieu genau befolgt. Die Portfreigabe in meinem Router und die entsprechenden Einstellungen in der DSM-Firewall
sind erledigt.
Nur wie geht es jetzt weiter? Wenn ich auf die Bildschirmsymbole in der Taskleiste klicke, versucht OpenVPN eine Verbindung herzustellen, die dann nicht
zustande kommt.
Ich habe meine Konfigurationsdatei mal in den Anhang gestellt.
Was kann ich tun, um dieses Programm noch nutzen zu können?
Vielen Dank im Voraus für Eure Bemühungen!
Liebe Grüße
Ralf
dev tun
tls-client
192.168.178.49
# The "float" tells OpenVPN to accept authenticated packets from any address,
# not only the address which was specified in the --remote option.
# This is useful when you are connecting to a peer which holds a dynamic address
# such as a dial-in user or DHCP client.
# (Please refer to the manual of OpenVPN for more information.)
#float
# If redirect-gateway is enabled, the client will redirect it's
# default network gateway through the VPN.
# It means the VPN connection will firstly connect to the VPN Server
# and then to the internet.
# (Please refer to the manual of OpenVPN for more information.)
#redirect-gateway
# dhcp-option DNS: To set primary domain name server address.
# Repeat this option to set secondary DNS server addresses.
#dhcp-option DNS DNS_IP_ADDRESS
pull
proto udp
script-security 2
ca ca.crt
comp-lzo
reneg-sec 0
auth-user-pass
heute brauche ich mal wieder Euren fachkundigen Rat. Vielleicht liest ja auch Frank mit, der mir bei der Einrichtung des VPN so prima geholfen hat.
Übrigens klappt es auch jetzt mit der Einbindung der freigegebenen Ordner.
Nun wollte ich mich ein Stück weiter bewegen und OpenVPN einrichten, da es ja etwa sicherer sein soll.
Ich habe die Anleitung von Matthieu genau befolgt. Die Portfreigabe in meinem Router und die entsprechenden Einstellungen in der DSM-Firewall
sind erledigt.
Nur wie geht es jetzt weiter? Wenn ich auf die Bildschirmsymbole in der Taskleiste klicke, versucht OpenVPN eine Verbindung herzustellen, die dann nicht
zustande kommt.
Ich habe meine Konfigurationsdatei mal in den Anhang gestellt.
Was kann ich tun, um dieses Programm noch nutzen zu können?
Vielen Dank im Voraus für Eure Bemühungen!
Liebe Grüße
Ralf
dev tun
tls-client
192.168.178.49
# The "float" tells OpenVPN to accept authenticated packets from any address,
# not only the address which was specified in the --remote option.
# This is useful when you are connecting to a peer which holds a dynamic address
# such as a dial-in user or DHCP client.
# (Please refer to the manual of OpenVPN for more information.)
#float
# If redirect-gateway is enabled, the client will redirect it's
# default network gateway through the VPN.
# It means the VPN connection will firstly connect to the VPN Server
# and then to the internet.
# (Please refer to the manual of OpenVPN for more information.)
#redirect-gateway
# dhcp-option DNS: To set primary domain name server address.
# Repeat this option to set secondary DNS server addresses.
#dhcp-option DNS DNS_IP_ADDRESS
pull
proto udp
script-security 2
ca ca.crt
comp-lzo
reneg-sec 0
auth-user-pass