Surveillance Station Immer wieder Verbindungsfehler seit neuer Surveilance Version

[weiss-nicht]

Hallo zusammen

Ich habe eine D-Link 2130 Kamera installiert.
Seit dem Update auf die neueste Version von Surveillance kommt es immer wieder zu Verbindungsabrüchen.
Vor diesem Update hat alles einwandfrei funktioniert.

Hier die Meldung

Sehr geehrter Benutzer,

Die Verbindung zwischen der Kamera P***** und DiskStationNAS wurde unterbrochen und der entsprechende Dienst steht daher nicht mehr zur Verfügung. Führen Sie bitte Korrekturmassnahmen aus.

Mit freundlichen Grüssen,
Synology DiskStation

 

[weiss-nicht]

Hat niemand eine Idee, an was das liegen könnte?

Ich habe schon den Router gewechselt auf einen Gigabyte-Router Netgear N900,
Auch das bringt keine Besserung.

Hier noch ein Auszug aus dem Protokoll der Surveillance-Station

Surveillance Station Protokoll

Typ Datum & Zeit Ereignis
Informationen 2012/09/23 10:31:15 [13] user selected events were deleted.
Informationen 2012/09/23 09:40:52 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/23 09:40:51 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/23 07:34:23 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/23 07:34:22 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/22 18:55:41 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/22 18:55:41 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/22 16:50:35 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/22 16:50:34 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/22 14:44:15 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/22 14:44:14 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/22 13:27:54 Setting [Post-Recording time] of camera [Panzi WZ] was changed to [120].
Informationen 2012/09/22 13:27:54 Setting [Pre-Recording time] of camera [Panzi WZ] was changed to [10].
Informationen 2012/09/22 13:26:26 Setting [Liveview Resolution] of camera [Panzi WZ] was changed to [1280x800].
Informationen 2012/09/22 13:26:26 Setting [Resolution] of camera [Panzi WZ] was changed to [1280x800].
Informationen 2012/09/22 13:24:27 Option setting [Motion detection method] of camera [Panzi WZ] was changed to [Motion detection by Surveillance station].
Informationen 2012/09/22 11:38:47 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/22 11:38:46 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/22 09:25:23 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/22 09:25:22 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/22 03:06:10 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/22 03:06:09 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/22 00:59:42 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/22 00:59:41 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/21 20:51:03 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/21 20:51:03 Connection to camera [Panzi WZ] was lost.
Fehler 2012/09/21 19:54:16 Failed to send email. (Failed to resolve host address.).
Informationen 2012/09/21 18:46:54 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/21 18:46:53 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/21 14:32:13 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/21 14:32:12 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/21 12:28:13 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/21 12:28:12 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/21 11:31:56 [12] user selected events were deleted.
Informationen 2012/09/21 11:15:57 Schedule setting of camera [Panzi WZ] was changed.
Informationen 2012/09/21 10:52:20 Schedule setting of camera [Panzi WZ] was changed.
Informationen 2012/09/21 10:52:20 Option setting [By Date] of camera [Panzi WZ] was changed to [enable].
Informationen 2012/09/21 10:52:20 Option setting [space] of camera [Panzi WZ] was changed to [1024000].
Informationen 2012/09/21 10:52:20 Setting [Liveview Resolution] of camera [Panzi WZ] was changed to [1280x720].
Informationen 2012/09/21 10:52:20 Setting [Resolution] of camera [Panzi WZ] was changed to [1280x720].
Informationen 2012/09/21 10:47:10 A new camera [Panzi WZ] was added.
Informationen 2012/09/21 09:32:51 Camera [Panzi WZ] was deleted.
Fehler 2012/09/21 09:32:09 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/21 09:15:30 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/21 09:15:29 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/20 22:42:08 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/20 22:42:08 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/20 16:23:33 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/20 16:23:32 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/20 14:22:29 Connection to camera [Panzi WZ] was recovered.
Fehler 2012/09/20 14:22:28 Connection to camera [Panzi WZ] was lost.
Informationen 2012/09/20 11:21:07 [18] user selected events were deleted.

 

[weiss-nicht]

Gemäss Support Synolgy ist dieses Problem Bekannt.

Es wundert mich, dass ich die einzige bin, die dieses Problem hier anspricht.

 

[Tommy2703]

Hallo

Ich stelle dasselbe Problem fest. Synology Firmware DSM 4.1-2647. Ebenfalls dLink Kamera DCS-942L.

Gruss, Tom

 

[weiss-nicht]

Das Problem Sollte eigentlich gemäss Support mit der Software DSM 4.1 2647 und Surveillance 6.0-2342
behoben sein.

Leider ist dieser Fehler immer noch vorhanden und der Support meldet sich nicht mehr!

 

[nols]

Habe das gleiche Problem mit D-Link DCS 2230... Auch mit neuster Version.

 

[aschild]

Genau das Problem haben wir seit dem Upgrade auch.
An der Hardware wurde nichts geändert, also muss es das Update sein

 

[Pitviper]

Hi

habe auch Probleme seit dem Update, möchte gerne die ältere Version aufspielen, was ja kein problem wäre
da man ja hier http://ukdl.synology.com/download/packages/ alle älteren Versionen findet, jedoch weiß ich nicht welche 6.0-2342 (aktuell ist 6.0-2352) die richtige ist für mein 1512+ ?

mfg

 

[nols]

Also auch mit neuester DSM und neuster SS habe ich immernoch die Probleme! Alle 1-2 Minuten trennt er die Verbindung, meistens stellt er sie auch wieder her, aber auch nicht immer

 

[weiss-nicht]

Das solltet ihr lesen

--------------------------------------------------------------------------------
Title: DCS-2130 FIRMWARE UPDATES PLEASE?!
Post by: RooKiED on October 07, 2012, 03:47:09 PM
--------------------------------------------------------------------------------

Hi,
I own two DCS 2130 and one DCS 2230.
Both models have been sold with really ugly firmwares. However, the recently released V1.10 firmware for the DCS-2230 has fixed all major problems (http://forums.dlink.com/index.php?topic=50853.0).

This still has not happened with 2130, even almost a year away from when the model was launched . The wireless network functionality was not working on 1.00! So some months ago I decided to update from the 1.00 to the beta DCS-2130_V1.01.03_test1. That fixed the wireless connectivity which is working fine but there are a few bugs here and there like DDNS is not updated regularly as it should or NTP time not being synced periodically right. They should be addressed like they were on the higher end model DCS-2230.

I've been googling around and found some firmwares on the web though.

DLink TW (http://tsd.dlink.com.tw/) (choose DCS, 2130, go!)
Firmware: DCS-2130 A1 FW v1.04th (for TESCO)
Release note says: V1.04th 1.Customize FW for Thailand Tesco project.

DLink IT (http://ftp.dlink.it/Products/DCS/DCS-2130/firmware/) (FTP)
DCS-2130_1.01.03.ftp_update(0224151954).rar 11.94Mb February 27 2012 at 11:16
dcs-2130_a1_fw_v1.00.00(38620203)(0229084802).zip 12.74Mb February 29 2012 at 11:10
DCS-2130_FW_V1.10.00(0308112429).dlink 13.50Mb March 9 2012 at 10:36
DCS-2130_V1.01.03_get2avalue(0319193010)(0320100418).rar 13.73Mb March 20 2012 at 10:18
DCS-2130_V1.01.03_test1(1230174407)(0102093407).rar 13.16Mb January 20 2012 at 10:51 Looks stable, but wireless connection drops periodically and does not reconnect until a couple of hours are gone by. No use for serious surveillance.

DLink RU (http://ftp.dlink.ru/pub/Multimedia/DCS-2130/Firmware/beta/) (FTP)
Beta Firmware: DCS-2130_V1.11.01.bin 24-Sep-2012 13:09 14M Newest beta firmware, also called "1.11wireless". Additions like COS, IPV6, Multicast and several bugfixes. Looks stable, wireless connection works fine. Although there are no release notes for it, this firmware is clearly based on the DCS-2230 V1.10.02 released firmware so release notes should be the same (http://ftp.dlink.ru/pub/Multimedia/DCS-2230/Firmware/DCS-2230 A1_Release Note_for_FW_V1.10.02.doc). I'm using this firmware right now, seems the best.

Has anybody tested them?
Any help will be appreciated.
Thanks.


--------------------------------------------------------------------------------
Title: Re: DCS-2130 FIRMWARE UPDATES PLEASE?!
Post by: JavaLawyer on October 08, 2012, 04:33:07 AM
--------------------------------------------------------------------------------

The D-Link Global site you are referencing is commonly known as D-Link Taiwan site, as the .tw suffix denotes Taiwan. The release notes for that version are essentially blank and the firmware file name seems to stray from normal D-Link convention. This firmware looks like a one-off version made for a specific purpose and may contain language-centric changes. I'm not sure about the unique versions on the D-Link Italy site either.

As always, please be careful when installing region-specific firmware, even if the files are posted on an official D-Link source. Firmware posted for non-WW and non-NA regions may adversely impact your hardware and/or user experience (especially if the changes relate to language/time).




--------------------------------------------------------------------------------
Title: Re: DCS-2130 FIRMWARE UPDATES PLEASE?!
Post by: RooKiED on October 08, 2012, 11:28:23 AM