Hibernate funktioniert nicht, werde aus Log-Einträgen nicht schlau

[ProXy]

Guten Abend,

meine DS412+ wechselt in den letzten Wochen nie mehr in den Hibernate-Modus, also habe ich mal nach und nach alles deaktivert und auch den Netzwerkstecker gezogen. Trotzdem laufen die Platten durch. Ich habe dann mal das Logging aktiviert, leider werde ich daraus nicht schlau. Hier einmal ein Auszug aus /var/log/messages:

Nov  5 19:51:36 HTP kernel: [80128.054943] [Block I/O] on [sdc1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:36 HTP kernel: [80128.062611] [Block I/O] on [sdd1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:36 HTP kernel: [80128.070272] [SCSI CMD] on [sda] - pid 0 [comm:(swapper/1)], ppid 0 [swapper/0]
Nov  5 19:51:36 HTP kernel: [80128.077590] [SCSI CMD] on [sdb] - pid 13 [comm:(ksoftirqd/1)], ppid 2 [kthreadd]
Nov  5 19:51:36 HTP kernel: [80128.085090] [SCSI CMD] on [sdc] - pid 0 [comm:(swapper/1)], ppid 0 [swapper/0]
Nov  5 19:51:36 HTP kernel: [80128.092403] [SCSI CMD] on [sdd] - pid 13 [comm:(ksoftirqd/1)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.893491] [Block I/O] on [md0] - pid 4503 [comm:(jbd2/md0-8)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.901160] [Block I/O] on [sda1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.908848] [Block I/O] on [sdb1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.916522] [Block I/O] on [sdc1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.924170] [Block I/O] on [sdd1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.931821] [SCSI CMD] on [sda] - pid 0 [comm:(swapper/0)], ppid 0 [swapper/0]
Nov  5 19:51:44 HTP kernel: [80135.939124] [SCSI CMD] on [sdb] - pid 0 [comm:(swapper/0)], ppid 0 [swapper/0]
Nov  5 19:51:44 HTP kernel: [80135.946442] [SCSI CMD] on [sdc] - pid 0 [comm:(swapper/0)], ppid 0 [swapper/0]
Nov  5 19:51:44 HTP kernel: [80135.953754] [SCSI CMD] on [sdd] - pid 3 [comm:(ksoftirqd/0)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.961154] [Block I/O] on [md0] - pid 4503 [comm:(jbd2/md0-8)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.968799] [SCSI CMD] on [sdb] - pid 4503 [comm:(jbd2/md0-8)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.976365] [SCSI CMD] on [sda] - pid 4503 [comm:(jbd2/md0-8)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.983935] [SCSI CMD] on [sdd] - pid 4503 [comm:(jbd2/md0-8)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.991509] [SCSI CMD] on [sdc] - pid 4503 [comm:(jbd2/md0-8)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80135.999097] [Block I/O] on [md0] - pid 4503 [comm:(jbd2/md0-8)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80136.006763] [SCSI CMD] on [sdc] - pid 0 [comm:(swapper/1)], ppid 0 [swapper/0]
Nov  5 19:51:44 HTP kernel: [80136.014097] [SCSI CMD] on [sda] - pid 0 [comm:(swapper/3)], ppid 0 [swapper/0]
Nov  5 19:51:44 HTP kernel: [80136.021415] [SCSI CMD] on [sdb] - pid 0 [comm:(swapper/1)], ppid 0 [swapper/0]
Nov  5 19:51:44 HTP kernel: [80136.028734] [SCSI CMD] on [sdd] - pid 0 [comm:(swapper/3)], ppid 0 [swapper/0]
Nov  5 19:51:44 HTP kernel: [80136.036043] [Block I/O] on [sda1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80136.043702] [Block I/O] on [sdb1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80136.051359] [Block I/O] on [sdc1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80136.059016] [Block I/O] on [sdd1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80136.066679] [SCSI CMD] on [sda] - pid 0 [comm:(swapper/1)], ppid 0 [swapper/0]
Nov  5 19:51:44 HTP kernel: [80136.074003] [SCSI CMD] on [sdb] - pid 13 [comm:(ksoftirqd/1)], ppid 2 [kthreadd]
Nov  5 19:51:44 HTP kernel: [80136.081532] [SCSI CMD] on [sdc] - pid 0 [comm:(swapper/1)], ppid 0 [swapper/0]
Nov  5 19:51:44 HTP kernel: [80136.088854] [SCSI CMD] on [sdd] - pid 13 [comm:(ksoftirqd/1)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.402757] [anon_inode:[timerfd]] (1027) - pid 25061 [comm:(synorelayd), u:(/usr/syno/sbin/synorelayd )], ppid 1 [init]
Nov  5 19:51:50 HTP kernel: [80142.413713] [Block I/O] on [md0] - pid 3055 [comm:(kworker/u8:2)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.421547] [Block I/O] on [sda1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.429198] [Block I/O] on [sdb1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.436863] [Block I/O] on [sdc1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.444522] [Block I/O] on [sdd1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.452171] [SCSI CMD] on [sda] - pid 0 [comm:(swapper/3)], ppid 0 [swapper/0]
Nov  5 19:51:50 HTP kernel: [80142.459501] [SCSI CMD] on [sdb] - pid 0 [comm:(swapper/3)], ppid 0 [swapper/0]
Nov  5 19:51:50 HTP kernel: [80142.466812] [SCSI CMD] on [sdc] - pid 4405 [comm:(kworker/3:1H)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.474556] [SCSI CMD] on [sdd] - pid 4405 [comm:(kworker/3:1H)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.482315] [Block I/O] on [md0] - pid 3055 [comm:(kworker/u8:2)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.490161] [SCSI CMD] on [sdb] - pid 3055 [comm:(kworker/u8:2)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.497920] [SCSI CMD] on [sda] - pid 3055 [comm:(kworker/u8:2)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.505675] [SCSI CMD] on [sdd] - pid 3055 [comm:(kworker/u8:2)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.513428] [SCSI CMD] on [sdc] - pid 3055 [comm:(kworker/u8:2)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.521190] [SCSI CMD] on [sdb] - pid 3055 [comm:(kworker/u8:2)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.528945] [SCSI CMD] on [sda] - pid 3055 [comm:(kworker/u8:2)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.536698] [SCSI CMD] on [sdb] - pid 0 [comm:(swapper/0)], ppid 0 [swapper/0]
Nov  5 19:51:50 HTP kernel: [80142.544016] [SCSI CMD] on [sda] - pid 0 [comm:(swapper/0)], ppid 0 [swapper/0]
Nov  5 19:51:50 HTP kernel: [80142.551328] [SCSI CMD] on [sdb] - pid 0 [comm:(swapper/0)], ppid 0 [swapper/0]
Nov  5 19:51:50 HTP kernel: [80142.558640] [SCSI CMD] on [sda] - pid 0 [comm:(swapper/0)], ppid 0 [swapper/0]
Nov  5 19:51:50 HTP kernel: [80142.565969] [Block I/O] on [sda1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.573629] [Block I/O] on [sdb1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.581275] [Block I/O] on [sdc1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.588942] [Block I/O] on [sdd1] - pid 4358 [comm:(md0_raid1)], ppid 2 [kthreadd]
Nov  5 19:51:50 HTP kernel: [80142.596609] [SCSI CMD] on [sda] - pid 0 [comm:(swapper/0)], ppid 0 [swapper/0]

Dies ist eigentlich das einzige, das die ganze Zeit abläuft. Kann mir jemand erklären, was das bedeutet? Sind das Zugriffe auf die Festplatte? Falls ja, wie kann ich herausfinden, wer hierfür zuständig ist?

Danke für eure Hilfe!

 

[FelixJ]

Ist hier etwas dabei rausgekommen? Habe mit meiner DS1515+ exakt das gleiche Problem. Alle APPs deaktiviert und komplett vom Netz genommen. Keine Verbesserung. Das Auslesen des Logs sah ähnlich ProXys Log aus. Um Hilfe wäre ich sehr dankbar.

Gruß Felix

 

[Taurus]

Ich möchte mich hier auch mal dranhängen. Nach dem letzten Update läuft der Server dauerhaft. Egal was man einstellt, nichts passiert. Netzwerkstecker habe ich auch gezogen. Er kann keine Anfragen mehr bekommen, aber trotzdem geht er nicht in den Ruhezustand. DS213+