HFS+ was/wie mounten?

[aaaha]

Hallo zusammen,

Ich habe eine externe 1.5TB 3,5“ HDD via USB an meiner DS411slim angeschlossen. Zuvor habe ich die Platte auf einem Mac mit HFS plus formatiert und das journaling mittels „diskutil disableJournal /dev/disk0s2“ deaktiviert.
Weiter befinden sich in der NAS 2x 1GB ext4 Platten im Synology Hybrid RAID Verbund

Laut Support Seite müsste die HFS+ Disk gemountet werden, wird sie aber leider nicht.

"mount -l" sagt

/dev/md0 on / type ext4 (rw,relatime,user_xattr,barrier=0,journal_checksum,data=ordered)
none on /dev type devtmpfs (rw,nosuid,noexec,relatime,size=122604k,nr_inodes=30651,mode=755)
none on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620)
none on /proc type proc (rw,nosuid,nodev,noexec,relatime)
none on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
/tmp on /tmp type tmpfs (rw,relatime)
/run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
/dev/shm on /dev/shm type tmpfs (rw,nosuid,nodev,relatime)
/proc/bus/usb on /proc/bus/usb type usbfs (rw,relatime)
/dev/mapper/vg1000-lv on /volume1 type ext4 (rw,relatime,user_xattr,synoacl,barrier=0,journal_checksum,data=writeback,jqfmt=vfsv0,usrjquota=aquota.user,grpjquota=aquota.group)
none on /config type configfs (rw,relatime)
/dev/mapper/vg1000-lv on /opt type ext4 (rw,relatime,user_xattr,synoacl,barrier=0,journal_checksum,data=writeback,jqfmt=vfsv0,usrjquota=aquota.user,grpjquota=aquota.group)
\\192.168.1.3\Harddisk on /volume1/homes/felix/vusolo_aufnahmen type cifs (rw,relatime,unc=\\192.168.1.3\Harddisk,username=,domain=WORKGROUP,uid=1027,forceuid,gid=100,forcegid,addr=192.168.1.3,file_mode=0777,dir_mode=0777,nocase,serverino,rsize=16384,wsize=57344)
none on /proc/fs/nfsd type nfsd (rw,relatime)

"sudo fdisk -l" sagt

Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000b8057

Device     Boot   Start        End    Sectors  Size Id Type
/dev/sda1           256    4980735    4980480  2.4G fd Linux raid autodetect
/dev/sda2       4980736    9175039    4194304    2G fd Linux raid autodetect
/dev/sda3       9437184 1953511007 1944073824  927G  f W95 Ext'd (LBA)
/dev/sda5       9453280 1953511007 1944057728  927G fd Linux raid autodetect


Disk /dev/mtdblock0: 512 KiB, 524288 bytes, 1024 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock1: 2 MiB, 2097152 bytes, 4096 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock2: 1.3 MiB, 1310720 bytes, 2560 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock3: 64 KiB, 65536 bytes, 128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock4: 128 KiB, 131072 bytes, 256 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock5: 64 KiB, 65536 bytes, 128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock6: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0004239b

Device     Boot   Start        End    Sectors  Size Id Type
/dev/sdb1           256    4980735    4980480  2.4G fd Linux raid autodetect
/dev/sdb2       4980736    9175039    4194304    2G fd Linux raid autodetect
/dev/sdb3       9437184 1953511007 1944073824  927G  f W95 Ext'd (LBA)
/dev/sdb5       9453280 1953511007 1944057728  927G fd Linux raid autodetect


Disk /dev/md0: 2.4 GiB, 2549940224 bytes, 4980352 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/md1: 2 GiB, 2147418112 bytes, 4194176 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/md2: 927 GiB, 995356311552 bytes, 1944055296 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mapper/vg1000-lv: 927 GiB, 995354476544 bytes, 1944051712 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

Mein Problem ist, ich kann in dem Wust an Daten nicht separieren, was sicher(!) die 1.5TB Platte ist um diese dann zu mounten, ohne das bestehende RAID zu zerstören.
Wer kann mir hier ein wenig helfen?


Vielen Dank für jede Klarheit-bringende Antwort im Voraus!!