Drive Client synchronisiert manche Ordner nicht

[FelixM]

Hallo susammen,

ich habe ein Problem mit Synology Drive, an dem ich bereits einige Stunden verbracht habe und alleine leider nicht weiter komme.

Folgendes Problem: Ich habe vier Team-Ordner auf dem NAS, welche ich mit meinem PC synchronisieren möchte (2-Wege-Synchronisierung). Zwei davon werden problemlos mit Drive synchronisiert. Bei zwei weiteren Team-Ordnern werden die auf dem NAS EXISTIERENDEN Ordner und Dateien einfach nicht auf den PC übertragen. Erstelle ich jedoch eine NEUE Datei innerhalb des "problematischen" Team-Ordners auf meinem PC, funktioniert alles problemlos. Diese wird sofort an das NAS übertragen. Lösche ich diese Datei auf dem PC, wird diese ebenfalls auf dem NAS gelöscht.

Verdächtig ist, dass beim Erstellen der Synchronisierungsaufgabe bei den "problematischen" Team-Ordnern im weiteren Verlauf beim Auswählen der zu synchronisierenden Team-Ordner vom NAS auch keine Unterverzeichnisse von diesem Ordner zu sehen bzw. auswählbar sind.

Vielleicht hat jemand eine Idee und kann mir weiterhelfen. Das wäre super! Vielen Dank schonmal vorab!

Viele Grüße,
Felix

 

[plang.pl]

Hi & Willkommen im Forum!
Vielleicht hat der entsprechende NAS-User, mit dem sich der Drive Client anmeldet, keine Rechte auf diese Ordner?!

 

[FelixM]

Danke plang.pl, aber eigentlich und wenn ich nichts versehentlich falsch eingestellt habe, müssten die Rechte vorhanden sein.

Würde es an falsch eingestellten Rechten liegen, würden neu erstellte Dateien doch auch nicht auf's NAS übertragen bzw. gelöscht werden, was ja aber funktioniert

Wie ich eben gesehen habe, wurden bei einem der beiden problematischen Team-Ordner auch zwei Unterverzeichnisse auf den PC übertragen, allerdings ohne Inhalt. Sehr seltsam.

 

[plang.pl]

Steht etwas im Protokoll-Center oder im Log des Drive Client?
Welche DSM-, Drive-Server- und Drive-Client-Version?

 

[FelixM]

Die DSM-Version ist: DSM 6.2.4-25556 Update 6
Drive-Server-Version: 3.0.3-12689
Drive-Client-Version: ebenfalls 3.0.3-12689

Ich habe das Diagnoseprotokoll vom Drive Client exportiert. In welcher der enthaltenen Dateien kann ich den Fehlerlog einsehen? Im Protokoll-Center kann ich nichts besonderes erkennen.

 

[Benie]

Stelle sicher, dass Sync files and folders with the prefix "." im Drive Client Sync task aktiviert ist.

 

[plang.pl]

Keine Ahnung. welche Dateien da relevant sind. Welche gibt es denn da bzw wie bekommt man dieses Diagnoseprotokoll?

 

[FelixM]

Keine Ahnung. welche Dateien da relevant sind. Welche gibt es denn da bzw wie bekommt man dieses Diagnoseprotokoll?

Über Synology Drive Client:

1. Gehen Sie zur Windows-Taskleiste oder zur Mac-Menüleiste und klicken Sie einmal mit der linken Maustaste auf das Synology Drive Client-Symbol. Klicken Sie auf das Auslassungszeichen unten rechts und gehen Sie zu Fehlerbehebung > Diagnoseprotokoll exportieren.
2. Klicken Sie auf Exportieren, um Protokolle zu erhalten. Standardmäßig werden die Protokolle in Ihrem Download-Ordner gespeichert.

Beim Exportieren erhalte ich einen LOG-Ordner, welcher 62 Dateien enthält, siehe Screenshot. Möglicherweise ist die daemon.txt relevant. Möchte diese nicht komplett hier veröffentlichen, weil sie sensible Daten enhält. Hier ein Ausschnitt der letzten Meldungen:

2022-10-01T22:35:29 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:35:40 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:35:50 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:36:01 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:36:12 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:36:23 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:36:34 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:36:45 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:36:56 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:37:07 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:37:17 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:37:28 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:37:39 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:37:50 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:38:01 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:38:12 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:38:23 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:38:34 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:38:44 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:38:55 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:39:06 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:39:18 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:39:28 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:39:39 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:39:50 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:40:01 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:40:12 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:40:22 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:40:33 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:40:44 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:40:55 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:41:06 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:41:16 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:41:27 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:41:38 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:41:49 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:42:00 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:42:11 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:42:21 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:42:32 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:42:43 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:42:54 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:43:05 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:43:07 (14268) [DEBUG] protocol-client.cpp(325): Receive response header: {"@proto": {"body-continue": 0, "date": 164587, "type": "header", "version": {"major": 7, "minor": 0}}, "alive": 150, "changes": [], "type": "response"}, body: null
2022-10-01T22:43:07 (14268) [DEBUG] protocol-client.cpp(133): Persistent connection for 150 seconds.
2022-10-01T22:43:11 (14268) [DEBUG] protocol-client.cpp(299): Send Request header: {"_action": "long_poll", "_agent": {"platform": "Windows", "type": "drive", "version": {"build": 12689, "major": 3, "mini": 3, "minor": 0}}, "profile_digest": "2a83ea171", "server_id": {"restore_id": "41b67ce1d335abdeXXXXXX3f4fff162ed5e246d8e"}, "session": "e685b3f7feggmu00489ukusd456f44f1", "subscribe": [{"node_id": 1, "path": "/", "recursive": 1, "sync_id": 24, "view_id": 14}, {"node_id": 1, "path": "/", "recursive": 1, "sync_id": 60, "view_id": 17}], "timeout": 400}, Request body: null
2022-10-01T22:43:16 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:43:26 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:43:37 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:43:48 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:43:59 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:44:10 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:44:21 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:44:32 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:44:43 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:44:54 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:45:04 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:45:15 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:45:26 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:45:37 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:45:48 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:45:59 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:46:10 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:46:21 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:46:32 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:46:42 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:46:53 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:47:04 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:47:15 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:47:26 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:47:37 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:47:48 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:47:59 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:48:09 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:48:20 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:48:31 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:48:42 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:48:53 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:49:04 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:49:15 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:49:25 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:49:36 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:49:47 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:49:58 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:50:09 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:50:20 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:50:30 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:50:41 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:50:52 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:51:01 (14268) [DEBUG] protocol-client.cpp(325): Receive response header: {"@proto": {"body-continue": 0, "date": 1664657461, "type": "header", "version": {"major": 7, "minor": 0}}, "alive": 150, "changes": [], "type": "response"}, body: null
2022-10-01T22:51:01 (14268) [DEBUG] protocol-client.cpp(133): Persistent connection for 150 seconds.
2022-10-01T22:51:03 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:51:04 (14268) [DEBUG] protocol-client.cpp(299): Send Request header: {"_action": "long_poll", "_agent": {"platform": "Windows", "type": "drive", "version": {"build": 12689, "major": 3, "mini": 3, "minor": 0}}, "profile_digest": "2agfn6ntc78545hj22jeazgjgh7871", "server_id": {"restore_id": "41bfv6jec01dfs46hg4dgg5402c4df89ab7hff8e"}, "session": "e6fg56u57fb7hhfzj551jik977n004l5f44f1", "subscribe": [{"node_id": 1, "path": "/", "recursive": 1, "sync_id": 24, "view_id": 14}, {"node_id": 1, "path": "/", "recursive": 1, "sync_id": 60, "view_id": 17}], "timeout": 400}, Request body: null
2022-10-01T22:51:14 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:51:25 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:51:35 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:51:46 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:51:57 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:52:08 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:52:19 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:52:30 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:52:41 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:52:52 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:53:03 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:53:13 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:53:24 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:53:35 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:53:46 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:53:57 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:54:08 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:54:13 (14268) [INFO] recycle-cleaner.cpp(60): Set abort with barrier.
2022-10-01T22:54:13 (14268) [INFO] barrier.cpp(40): Worker (11): Register barrier.
2022-10-01T22:54:13 (14268) [INFO] barrier.cpp(50): Worker (11): Reach barrier.
2022-10-01T22:54:13 (14268) [INFO] long-poll-manager.cpp(77): Pause connection 0.
2022-10-01T22:54:13 (14268) [INFO] long-poller.cpp(42): Pause long poller for connection 5.
2022-10-01T22:54:13 (14268) [INFO] recycle-cleaner.cpp(115): Abort done.
2022-10-01T22:54:13 (14268) [INFO] long-poll-manager.cpp(188): Interrupt long pollers. (connection: 0)
2022-10-01T22:54:13 (14268) [INFO] long-poller.cpp(74): Set abort with barrier.
2022-10-01T22:54:13 (14268) [INFO] barrier.cpp(40): Worker (13): Register barrier.
2022-10-01T22:54:14 (14268) [ERROR] channel.cpp(908): bio error is set to -2 (rc: 0, len: 1).
2022-10-01T22:54:14 (14268) [WARNING] stream.cpp(1238): Channel: -2
2022-10-01T22:54:14 (14268) [ERROR] stream.cpp(1854): Error stack:
2022-10-01T22:54:14 (14268) [DEBUG] protocol-client.cpp(325): Receive response header: null, body: null
2022-10-01T22:54:14 (14268) [ERROR] protocol-client.cpp(190): Failed to send protocol. (code: -1)
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(50): Worker (13): Reach barrier.
2022-10-01T22:54:14 (14268) [INFO] long-poller.cpp(210): Abort done.
2022-10-01T22:54:14 (14268) [INFO] long-poll-manager.cpp(212): Interrupt done.
2022-10-01T22:54:14 (14268) [INFO] daemon-impl.cpp(983): remove_one_session '17'.
2022-10-01T22:54:14 (14268) [INFO] daemon-impl.cpp(1314): remove 17 worker process
2022-10-01T22:54:14 (14268) [INFO] worker_mgr.cpp(81): WorkerManager: pause all worker
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (0): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (1): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (2): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (3): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (4): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (5): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(50): Worker (4): Reach barrier.
2022-10-01T22:54:14 (14268) [DEBUG] fetch-worker.cpp(77): fetchworker pause and wait
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(50): Worker (5): Reach barrier.
2022-10-01T22:54:14 (14268) [DEBUG] fetch-worker.cpp(77): fetchworker pause and wait
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(50): Worker (3): Reach barrier.
2022-10-01T22:54:14 (14268) [DEBUG] fetch-worker.cpp(77): fetchworker pause and wait
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(50): Worker (0): Reach barrier.
2022-10-01T22:54:14 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(50): Worker (2): Reach barrier.
2022-10-01T22:54:14 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:14 (14268) [INFO] worker_mgr.cpp(81): WorkerManager: pause all worker
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (6): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (7): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (8): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(50): Worker (1): Reach barrier.
2022-10-01T22:54:14 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:14 (14268) [DEBUG] sync_worker.cpp(32): Worker get stop status, stop polling
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(50): Worker (6): Reach barrier.
2022-10-01T22:54:14 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:14 (14268) [DEBUG] sync_worker.cpp(32): Worker get stop status, stop polling
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(50): Worker (7): Reach barrier.
2022-10-01T22:54:14 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:14 (14268) [DEBUG] sync_worker.cpp(32): Worker get stop status, stop polling
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(50): Worker (8): Reach barrier.
2022-10-01T22:54:14 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:14 (14268) [INFO] worker_mgr.cpp(106): WorkerManager: resume all worker
2022-10-01T22:54:14 (14268) [INFO] worker_mgr.cpp(106): WorkerManager: resume all worker
2022-10-01T22:54:14 (14268) [INFO] long-poll-manager.cpp(53): Remove session 17 (connection 5).
2022-10-01T22:54:14 (14268) [INFO] long-poller.cpp(134): Remove session 17.
2022-10-01T22:54:14 (14268) [INFO] daemon-impl.cpp(1039): session '17' is removed.
2022-10-01T22:54:14 (14268) [INFO] event-db.cpp(329): FileEventDB has been deinitialzed
2022-10-01T22:54:14 (14268) [INFO] daemon-impl.cpp(983): remove_one_session '20'.
2022-10-01T22:54:14 (14268) [INFO] daemon-impl.cpp(1314): remove 20 worker process
2022-10-01T22:54:14 (14268) [INFO] worker_mgr.cpp(81): WorkerManager: pause all worker
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (0): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (1): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (2): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (3): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (4): Register barrier.
2022-10-01T22:54:14 (14268) [INFO] barrier.cpp(40): Worker (5): Register barrier.
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(50): Worker (1): Reach barrier.
2022-10-01T22:54:15 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(50): Worker (0): Reach barrier.
2022-10-01T22:54:15 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(50): Worker (5): Reach barrier.
2022-10-01T22:54:15 (14268) [DEBUG] fetch-worker.cpp(77): fetchworker pause and wait
2022-10-01T22:54:15 (14268) [INFO] worker_mgr.cpp(81): WorkerManager: pause all worker
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(50): Worker (3): Reach barrier.
2022-10-01T22:54:15 (14268) [DEBUG] fetch-worker.cpp(77): fetchworker pause and wait
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(50): Worker (4): Reach barrier.
2022-10-01T22:54:15 (14268) [DEBUG] fetch-worker.cpp(77): fetchworker pause and wait
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(50): Worker (2): Reach barrier.
2022-10-01T22:54:15 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(40): Worker (6): Register barrier.
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(40): Worker (7): Register barrier.
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(40): Worker (8): Register barrier.
2022-10-01T22:54:15 (14268) [DEBUG] sync_worker.cpp(32): Worker get stop status, stop polling
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(50): Worker (6): Reach barrier.
2022-10-01T22:54:15 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:15 (14268) [DEBUG] sync_worker.cpp(32): Worker get stop status, stop polling
2022-10-01T22:54:15 (14268) [DEBUG] sync_worker.cpp(32): Worker get stop status, stop polling
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(50): Worker (8): Reach barrier.
2022-10-01T22:54:15 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:15 (14268) [INFO] worker_mgr.cpp(106): WorkerManager: resume all worker
2022-10-01T22:54:15 (14268) [INFO] worker_mgr.cpp(106): WorkerManager: resume all worker
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(50): Worker (7): Reach barrier.
2022-10-01T22:54:15 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:15 (14268) [INFO] long-poll-manager.cpp(53): Remove session 20 (connection 5).
2022-10-01T22:54:15 (14268) [INFO] long-poller.cpp(134): Remove session 20.
2022-10-01T22:54:15 (14268) [INFO] daemon-impl.cpp(1039): session '20' is removed.
2022-10-01T22:54:15 (14268) [INFO] event-db.cpp(329): FileEventDB has been deinitialzed
2022-10-01T22:54:15 (14268) [INFO] daemon-impl.cpp(983): remove_one_session '21'.
2022-10-01T22:54:15 (14268) [INFO] daemon-impl.cpp(1314): remove 21 worker process
2022-10-01T22:54:15 (14268) [INFO] worker_mgr.cpp(81): WorkerManager: pause all worker
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(40): Worker (0): Register barrier.
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(40): Worker (1): Register barrier.
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(40): Worker (2): Register barrier.
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(40): Worker (3): Register barrier.
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(40): Worker (4): Register barrier.
2022-10-01T22:54:15 (14268) [INFO] barrier.cpp(40): Worker (5): Register barrier.
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(50): Worker (2): Reach barrier.
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(50): Worker (4): Reach barrier.
2022-10-01T22:54:16 (14268) [DEBUG] fetch-worker.cpp(77): fetchworker pause and wait
2022-10-01T22:54:16 (14268) [INFO] worker_mgr.cpp(81): WorkerManager: pause all worker
2022-10-01T22:54:16 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(50): Worker (0): Reach barrier.
2022-10-01T22:54:16 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(50): Worker (5): Reach barrier.
2022-10-01T22:54:16 (14268) [DEBUG] fetch-worker.cpp(77): fetchworker pause and wait
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(40): Worker (6): Register barrier.
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(40): Worker (7): Register barrier.
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(40): Worker (8): Register barrier.
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(50): Worker (3): Reach barrier.
2022-10-01T22:54:16 (14268) [DEBUG] fetch-worker.cpp(77): fetchworker pause and wait
2022-10-01T22:54:16 (14268) [DEBUG] sync_worker.cpp(32): Worker get stop status, stop polling
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(50): Worker (8): Reach barrier.
2022-10-01T22:54:16 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(50): Worker (1): Reach barrier.
2022-10-01T22:54:16 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:16 (14268) [DEBUG] sync_worker.cpp(32): Worker get stop status, stop polling
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(50): Worker (7): Reach barrier.
2022-10-01T22:54:16 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:16 (14268) [DEBUG] sync_worker.cpp(32): Worker get stop status, stop polling
2022-10-01T22:54:16 (14268) [INFO] barrier.cpp(50): Worker (6): Reach barrier.
2022-10-01T22:54:16 (14268) [DEBUG] worker.cpp(109): worker pause and wait
2022-10-01T22:54:16 (14268) [INFO] worker_mgr.cpp(106): WorkerManager: resume all worker
2022-10-01T22:54:16 (14268) [INFO] worker_mgr.cpp(106): WorkerManager: resume all worker
2022-10-01T22:54:16 (14268) [INFO] long-poll-manager.cpp(53): Remove session 21 (connection 5).
2022-10-01T22:54:16 (14268) [INFO] long-poller.cpp(134): Remove session 21.
2022-10-01T22:54:16 (14268) [INFO] daemon-impl.cpp(1039): session '21' is removed.
2022-10-01T22:54:16 (14268) [INFO] event-db.cpp(329): FileEventDB has been deinitialzed
2022-10-01T22:54:16 (14268) [INFO] long-poll-manager.cpp(103): Resume connection 0.
2022-10-01T22:54:16 (14268) [INFO] long-poller.cpp(33): Resume long poller for connection 5.
2022-10-01T22:54:16 (14268) [INFO] long-poll-manager.cpp(163): Remove all long pollers.
2022-10-01T22:54:16 (14268) [INFO] long-poller.cpp(51): Stop long poller for connection 5.
2022-10-01T22:54:17 (14268) [INFO] long-poller.cpp(200): Long poller for connection 5 is down.
2022-10-01T22:54:17 (14268) [INFO] connection.cpp(184): reset channel pool with capacity 0
2022-10-01T22:54:17 (14268) [INFO] daemon-impl.cpp(1267): connection #0 is removed
2022-10-01T22:54:17 (14268) [INFO] daemon-impl.cpp(836): unlink daemon
2022-10-01T22:54:17 (14268) [DEBUG] snapshot-worker.cpp(74): Waiting queue is empty, wait for next
2022-10-01T22:54:17 (14268) [DEBUG] snapshot-worker.cpp(130): SnapShot Worker (12) down
2022-10-01T23:22:11 (8588) [NOTE] main.cpp(415): ===== Drive Daemon (build-12689) is now running in the background =====
2022-10-01T23:22:11 (8588) [INFO] daemon-impl.cpp(2502): main thread starts receiving messages
2022-10-01T23:22:11 (8588) [INFO] main.cpp(197): daemon is listening on local port 57859
2022-10-01T23:22:11 (8588) [INFO] daemon-impl.cpp(809): Link Synology Drive Client daemon, version: 12689
2022-10-01T23:22:11 (8588) [INFO] filter-db.cpp(118): FilterDB has been initialized with location 'C:\Users\User\AppData\Local\SynologyDrive\data\db\filter.sqlite'
2022-10-01T23:22:11 (8588) [ERROR] file-op-win.cpp(725): FSMKDir create directory path: error reason: No such process(3)
2022-10-01T23:22:11 (8588) [INFO] worker_mgr.cpp(21): worker manager creat 3 worker(s)
2022-10-01T23:22:11 (8588) [INFO] sync_worker_mgr.cpp(15): syncer worker manager creat 3 worker(s)
2022-10-01T23:22:11 (8588) [INFO] worker_mgr.cpp(133): WorkerManager: start all worker
2022-10-01T23:22:11 (8588) [DEBUG] worker.cpp(99): Worker (0) is up.
2022-10-01T23:22:11 (8588) [DEBUG] worker.cpp(99): Worker (1) is up.
2022-10-01T23:22:11 (8588) [DEBUG] worker.cpp(99): Worker (2) is up.
2022-10-01T23:22:11 (8588) [DEBUG] fetch-worker.cpp(67): FetchWorker (3) is up.
2022-10-01T23:22:11 (8588) [INFO] worker_mgr.cpp(133): WorkerManager: start all worker
2022-10-01T23:22:11 (8588) [DEBUG] fetch-worker.cpp(67): FetchWorker (4) is up.
2022-10-01T23:22:11 (8588) [DEBUG] fetch-worker.cpp(67): FetchWorker (5) is up.
2022-10-01T23:22:11 (8588) [DEBUG] worker.cpp(99): Worker (6) is up.
2022-10-01T23:22:11 (8588) [DEBUG] worker.cpp(99): Worker (7) is up.
2022-10-01T23:22:11 (8588) [DEBUG] worker.cpp(99): Worker (8) is up.
2022-10-01T23:22:11 (8588) [DEBUG] snapshot-worker.cpp(55): SnapShot Worker (12) up
2022-10-01T23:22:11 (8588) [INFO] daemon-impl.cpp(1195): connection #5 is added:
2022-10-01T23:22:11 (8588) [INFO] daemon-impl.cpp(1196): server = 127.0.0.1, port = 64210
2022-10-01T23:22:11 (8588) [INFO] daemon-impl.cpp(1197): ssl = 1, allow untrust = 1
2022-10-01T23:22:11 (8588) [INFO] connection.cpp(184): reset channel pool with capacity 5
2022-10-01T23:22:11 (8588) [INFO] daemon-impl.cpp(1774): session #17 is added, info = {"action": "add_session", "attribute_check_strength": 0, "config_path": "C:\Users\User\AppData\Local\SynologyDrive\data\session\17", "conflict_policy": "compare_mtime", "connection_id": 5, "ignore_local_remove": 0, "node_id": 1, "read_only": 0, "remote_path": "/", "rename_conflict": 1, "session_id": 17, "share_name": "Felix", "sync_direction": 0, "sync_folder": "D:\Felix", "sync_mode": 0, "sync_shared_with_me": 0, "sync_temp_file": 0, "use_windows_cloud_file_api": 0, "view_id": 14}
2022-10-01T23:22:11 (8588) [INFO] event-db.cpp(309): FileEventDB has been initialized with location 'C:\Users\User\AppData\Local\SynologyDrive\data\session\17/db/event-db.sqlite'
2022-10-01T23:22:11 (8588) [INFO] event-db.cpp(310): FileEventDB::m_signPath has been initialized with location 'C:\Users\User\AppData\Local\SynologyDrive\data\session\17/db/sign'
2022-10-01T23:22:11 (8588) [INFO] syncer-event-manager.cpp(380): Session '17' reload three-way merge scan event count = 0
2022-10-01T23:22:11 (8588) [INFO] long-poll-manager.cpp(33): Register session 17 (connection 5).
2022-10-01T23:22:11 (8588) [INF

 

[FelixM]

Stelle sicher, dass Sync files and folders with the prefix "." im Drive Client Sync task aktiviert ist.

Habe das probehalber aktiviert, hat leider keine Abhilfe versschaffen...

 

[plang.pl]

Das Protokoll sieht ja jetzt erst mal nicht danach aus, als ob da irgendwelche Fehler geloggt werden.
Ich würde bei Synology ein Ticket aufmachen. Alles, was wir hier machen können, ist Rätselraten.

 

[FelixM]

Das werde ich tun, danke trotzdem für die Bemühungen