Sundtek SkyTV Ultimate und TvH geht nach Update nicht mehr

[noxx]

Hallo,

nach meinem letzten DSM und TvH Update geht mein DVB-Stick nicht mehr.
Das System scheint ihn zu erkennen, aber in TvH unter Adapter wird nichts mehr
angezeigt.
USB Port habe ich schon gewechselt, auch neuinstallation der Treiber. Alles ohne Erfolg.

Vielleicht kann mir hier ja einer helfen.

Ich habe eine DS218+ mit DSM 6.1.7. TvH ist v6.2.6-13

Gruß

dmesg|grep usb
[    0.000000] Command line: root=/dev/md0 earlyprintk=apl console=ttyS2,115200n8 ihd_num=2 netif_num=1 HddHotplug=1 SataPortMap=21 syno_hw_version=DS218+ vender_format_version=2 syno_hdd_detect=18,179,176,175 syno_hdd_enable=21,20,19,9 syno_usb_vbus_gpio=11@0000:00:15.0@1,10@0000:00:15.0@2,13@0000:00:15.0@3 sn=1780PCN404810 macs=0011327d3d5a
[    0.000000] Kernel command line: root=/dev/md0 earlyprintk=apl console=ttyS2,115200n8 ihd_num=2 netif_num=1 HddHotplug=1 SataPortMap=21 syno_hw_version=DS218+ vender_format_version=2 syno_hdd_detect=18,179,176,175 syno_hdd_enable=21,20,19,9 syno_usb_vbus_gpio=11@0000:00:15.0@1,10@0000:00:15.0@2,13@0000:00:15.0@3 sn=1780PCN404810 macs=0011327d3d5a
[   32.079850] usbcore: registered new interface driver usbfs
[   32.086032] usbcore: registered new interface driver hub
[   32.092034] usbcore: registered new interface driver ethub
[   32.098201] usbcore: registered new device driver usb
[   32.415417] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   32.732278] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[   33.018376] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[   57.781147] usb-storage 1-4:1.0: USB Mass Storage device detected
[   57.791661] scsi host3: usb-storage 1-4:1.0
[   57.797557] usbcore: registered new interface driver usb-storage
[   57.830905] usbcore: registered new interface driver usblp
[   57.912222] usbcore: registered new interface driver usbhid
[   57.919602] usbhid: USB HID core driver
[  240.156091] usb 1-1: USB disconnect, device number 2
[  240.416069] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[  240.546127] usb 1-1: Device not responding to setup address.
[  240.753105] usb 1-1: Device not responding to setup address.
[  240.960078] usb 1-1: device not accepting address 4, error -71
[  279.398062] usb 1-1: new high-speed USB device number 6 using xhci_hcd
[  281.913506] usb 1-1: USB disconnect, device number 6
[  282.384230] usb 1-1: new high-speed USB device number 8 using xhci_hcd
[  283.268669] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd mediasrv rqt 64 rq 0 len 4 ret -71
[  283.334348] usb 1-1: USB disconnect, device number 8
[  283.598274] usb 1-1: new high-speed USB device number 9 using xhci_hcd
root@DS218:/#