Hallo,
DS 1813+ lässt sich nicht mehr updaten:
aktuelle Version : DSM 6.2.2-24922
Die neuen (-1 bis -3) brechen alle mit Fehler ab, dass angeblich die Datei korrupt sei.
Auch bei einem manuellem Update kommt der Fehler (vorher die FW fehlerfrei vom FTP geladen).
/dev/mdo ist zu 50% frei
Im Messages log finde ich folgende Fehler:
2019-11-04T16:14:21+01:00 * updater: updater.c:6172 Start of the updater...
2019-11-04T16:14:21+01:00 * updater: updater.c:6438 ==== Start flash update ====
2019-11-04T16:14:21+01:00 * updater: updater.c:6442 This is X86 platform
2019-11-04T16:14:21+01:00 * kernel: [594842.574833] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=6414
2019-11-04T16:14:22+01:00 * kernel: [594844.224793] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:22+01:00 * kernel: [594844.233749] cdb[0]=0x2a: 2a 00 00 00 7d 82 00 00 01 00
2019-11-04T16:14:22+01:00 * kernel: [594844.239218] end_request: I/O error, dev synoboot, sector 32130
2019-11-04T16:14:22+01:00 * kernel: [594844.245144] Buffer I/O error on device synoboot2, logical block in range 0 + 0-2(12)
2019-11-04T16:14:22+01:00 * kernel: [594844.252997] lost page write due to I/O error on synoboot2
2019-11-04T16:14:22+01:00 * kernel: [594844.258710] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=6414
2019-11-04T16:14:24+01:00 * kernel: [594845.909231] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:24+01:00 * kernel: [594845.918140] cdb[0]=0x28: 28 00 00 00 7d 82 00 00 01 00
2019-11-04T16:14:24+01:00 * kernel: [594845.923611] end_request: I/O error, dev synoboot, sector 32130
2019-11-04T16:14:24+01:00 * kernel: [594845.929570] FAT-fs (synoboot2): unable to read boot sector to mark fs as dirty
2019-11-04T16:14:24+01:00 * kernel: [594845.966137] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=6414
2019-11-04T16:14:26+01:00 * kernel: [594847.612536] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:26+01:00 * kernel: [594847.621453] cdb[0]=0x2a: 2a 00 00 00 7d 82 00 00 01 00
2019-11-04T16:14:26+01:00 * kernel: [594847.626975] end_request: I/O error, dev synoboot, sector 32130
2019-11-04T16:14:26+01:00 * kernel: [594847.632923] Buffer I/O error on device synoboot2, logical block 0
2019-11-04T16:14:26+01:00 * kernel: [594847.639165] lost page write due to I/O error on synoboot2
2019-11-04T16:14:26+01:00 * kernel: [594847.644953] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=6414
2019-11-04T16:14:27+01:00 * kernel: [594849.297817] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:27+01:00 * kernel: [594849.306789] cdb[0]=0x28: 28 00 00 00 7d 82 00 00 01 00
2019-11-04T16:14:27+01:00 * kernel: [594849.312285] end_request: I/O error, dev synoboot, sector 32130
2019-11-04T16:14:27+01:00 * kernel: [594849.318260] FAT-fs (synoboot2): unable to read boot sector to mark fs as dirty
2019-11-04T16:14:27+01:00 * kernel: [594849.355459] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=6414
2019-11-04T16:14:29+01:00 * kernel: [594851.006207] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:29+01:00 * kernel: [594851.015171] cdb[0]=0x2a: 2a 00 00 00 7d 82 00 00 01 00
2019-11-04T16:14:29+01:00 * kernel: [594851.020659] end_request: I/O error, dev synoboot, sector 32130
2019-11-04T16:14:29+01:00 * kernel: [594851.026603] Buffer I/O error on device synoboot2, logical block 0
2019-11-04T16:14:29+01:00 * kernel: [594851.032816] lost page write due to I/O error on synoboot2
2019-11-04T16:14:44+01:00 * kernel: [594866.138511] end_request: I/O error, dev synoboot, sector in range 32768 + 0-2(12)
2019-11-04T16:14:44+01:00 * kernel: [594866.146120] Buffer I/O error on device synoboot2, logical block in range 4096 + 0-2(12)
2019-11-04T16:14:44+01:00 * kernel: [594866.154238] Buffer I/O error on device synoboot2, logical block in range 4096 + 0-2(12)
2019-11-04T16:14:44+01:00 * kernel: [594866.162364] Buffer I/O error on device synoboot2, logical block in range 4096 + 0-2(12)
2019-11-04T16:14:44+01:00 * kernel: [594866.170506] Buffer I/O error on device synoboot2, logical block in range 4096 + 0-2(12)
2019-11-04T16:14:46+01:00 * kernel: [594867.823400] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:54+01:00 * kernel: [594876.197352] FAT-fs (synoboot2): FAT read failed (blocknr 8)
2019-11-04T16:14:56+01:00 * kernel: [594877.848389] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:56+01:00 * kernel: [594877.857334] cdb[0]=0x28: 28 00 00 00 7d 8a 00 00 01 00
(Die oberen wiederholen sich viele Male)
2019-11-04T16:39:02+01:00 * kernel: [596322.937828] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:39:02+01:00 * kernel: [596322.946748] cdb[0]=0x28: 28 00 00 00 7d 82 00 00 01 00
2019-11-04T16:39:02+01:00 * kernel: [596322.952229] end_request: I/O error, dev synoboot, sector in range 28672 + 0-2(12)
2019-11-04T16:39:02+01:00 * kernel: [596322.959813] FAT-fs (synoboot2): unable to read boot sector to mark fs as dirty
2019-11-04T16:39:02+01:00 * updater: updater.c:2799 No need to reset reason for v.24922
2019-11-04T16:39:02+01:00 * updater: updater.c:7000 Failed to accomplish the update! (errno = 16)
2019-11-04T16:39:02+01:00 * smallupd@ter: smallupdate.cpp:1139 failed to exec updater -ir
2019-11-04T16:39:02+01:00 * smallupd@ter: smallupdate.cpp:1310 failed to update flash
2019-11-04T16:39:02+01:00 * smallupd@ter: small_update.cpp:20 Failed to apply smallupdate.
2019-11-04T16:39:02+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[6324]: Upgrade.cpp:245 Fail to exec smallupdater
2019-11-04T16:39:02+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9435]: servicecfg_root_object_get.c:115 service config for service [syno_disk_latency_r
ecord_scheduler] is not exist
2019-11-04T16:39:02+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9435]: service_sort_start_list.c:51 SLIBServicecfgInfoGet failed.
2019-11-04T16:39:02+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [ActiveBackup]
2019-11-04T16:39:02+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [ActiveDirectoryServer]
2019-11-04T16:39:03+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [DirectoryServerForWindowsDomain]
2019-11-04T16:39:03+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [PHP5.6]
2019-11-04T16:39:03+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [PHP7.0]
2019-11-04T16:39:03+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [PHP7.2]
2019-11-04T16:39:04+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [SurveillanceStation]
2019-11-04T16:39:04+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9435]: servicecfg_root_object_get.c:115 service config for service [syno_disk_latency_r
ecord_scheduler] is not exist
2019-11-04T16:39:04+01:00 * [596325.143282] init: smbd main process (7773) killed by TERM signal
2019-11-04T16:39:05+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9533]: servicecfg_root_object_get.c:115 service config for service [syno_disk_latency_r
ecord_scheduler] is not exist
2019-11-04T16:39:05+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9533]: service_sort_start_list.c:51 SLIBServicecfgInfoGet failed.
2019-11-04T16:39:07+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9533]: servicecfg_root_object_get.c:115 service config for service [syno_disk_latency_r
ecord_scheduler] is not exist
2019-11-04T16:39:07+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9533]: update_cpputil.cpp:700 synoservice: start all packages ...
2019-11-04T16:39:15+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9533]: update_cpputil.cpp:750 synoservice: finish started all packages
2019-11-04T16:39:15+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9958]: update_cpputil.cpp:700 synoservice: start all packages ...
2019-11-04T16:39:15+01:00 * [596336.311174] init: synopyntlmd main process (9962) terminated with status 1
2019-11-04T16:39:15+01:00 * [596336.318457] init: synopyntlmd main process ended, respawning
2019-11-04T16:39:15+01:00 * [596336.520659] init: synopyntlmd main process (9974) terminated with status 1
2019-11-04T16:39:15+01:00 * [596336.527856] init: synopyntlmd main process ended, respawning
2019-11-04T16:39:15+01:00 * [596336.732285] init: synopyntlmd main process (9980) terminated with status 1
2019-11-04T16:39:15+01:00 * [596336.739463] init: synopyntlmd main process ended, respawning
2019-11-04T16:39:16+01:00 * [596336.943142] init: synopyntlmd main process (9986) terminated with status 1
2019-11-04T16:39:16+01:00 * [596336.950270] init: synopyntlmd main process ended, respawning
2019-11-04T16:39:16+01:00 * [596337.149180] init: synopyntlmd main process (9989) terminated with status 1
2019-11-04T16:39:16+01:00 * [596337.156360] init: synopyntlmd main process ended, respawning
2019-11-04T16:39:16+01:00 * [596337.363026] init: synopyntlmd main process (9996) terminated with status 1
2019-11-04T16:39:16+01:00 * [596337.370344] init: synopyntlmd respawning too fast, stopped
2019-11-04T16:39:21+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9958]: update_cpputil.cpp:750 synoservice: finish started all packages
2019-11-04T16:39:21+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[6324]: Upgrade.cpp:733 Failed to apply smallupdate
(Hier endet dann das message File)
So wie ich das lese, gibt es Lesefehler im synoboot bzw. synoboot2....
Da ich mich mit Linux eher schlecht als recht rumschlage, habe ich nirgendwo infos darüber gefunden,
was synoboot bzw. synoboot überhaupt ist.
Ist dies die Firmware (bootloader), die fest in der Synology gespeichert ist?
Ist dies ein Bereich auf der Systempartition, die auf allen Laufwerken gespiegelt wird (aber warum zeigt sie dann einen I/O Fehler?)?
Lässt sich der Fehler durch Neuinstallation korrigieren oder ist ein Bauteil auf (ROM) auf der DS defekt und die Hardware muss getauscht werden?
Steht der Fehler überhaupt in einem Zusammenhang mit dem nicht erfolgreichen Update?
Kann mit jemand einen Tipp geben, was ich am besten tun sollte?
DS 1813+ lässt sich nicht mehr updaten:
aktuelle Version : DSM 6.2.2-24922
Die neuen (-1 bis -3) brechen alle mit Fehler ab, dass angeblich die Datei korrupt sei.
Auch bei einem manuellem Update kommt der Fehler (vorher die FW fehlerfrei vom FTP geladen).
/dev/mdo ist zu 50% frei
Im Messages log finde ich folgende Fehler:
2019-11-04T16:14:21+01:00 * updater: updater.c:6172 Start of the updater...
2019-11-04T16:14:21+01:00 * updater: updater.c:6438 ==== Start flash update ====
2019-11-04T16:14:21+01:00 * updater: updater.c:6442 This is X86 platform
2019-11-04T16:14:21+01:00 * kernel: [594842.574833] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=6414
2019-11-04T16:14:22+01:00 * kernel: [594844.224793] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:22+01:00 * kernel: [594844.233749] cdb[0]=0x2a: 2a 00 00 00 7d 82 00 00 01 00
2019-11-04T16:14:22+01:00 * kernel: [594844.239218] end_request: I/O error, dev synoboot, sector 32130
2019-11-04T16:14:22+01:00 * kernel: [594844.245144] Buffer I/O error on device synoboot2, logical block in range 0 + 0-2(12)
2019-11-04T16:14:22+01:00 * kernel: [594844.252997] lost page write due to I/O error on synoboot2
2019-11-04T16:14:22+01:00 * kernel: [594844.258710] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=6414
2019-11-04T16:14:24+01:00 * kernel: [594845.909231] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:24+01:00 * kernel: [594845.918140] cdb[0]=0x28: 28 00 00 00 7d 82 00 00 01 00
2019-11-04T16:14:24+01:00 * kernel: [594845.923611] end_request: I/O error, dev synoboot, sector 32130
2019-11-04T16:14:24+01:00 * kernel: [594845.929570] FAT-fs (synoboot2): unable to read boot sector to mark fs as dirty
2019-11-04T16:14:24+01:00 * kernel: [594845.966137] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=6414
2019-11-04T16:14:26+01:00 * kernel: [594847.612536] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:26+01:00 * kernel: [594847.621453] cdb[0]=0x2a: 2a 00 00 00 7d 82 00 00 01 00
2019-11-04T16:14:26+01:00 * kernel: [594847.626975] end_request: I/O error, dev synoboot, sector 32130
2019-11-04T16:14:26+01:00 * kernel: [594847.632923] Buffer I/O error on device synoboot2, logical block 0
2019-11-04T16:14:26+01:00 * kernel: [594847.639165] lost page write due to I/O error on synoboot2
2019-11-04T16:14:26+01:00 * kernel: [594847.644953] FAT-fs (synoboot2): fat_set_state: set=0 process=updater pid=6414
2019-11-04T16:14:27+01:00 * kernel: [594849.297817] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:27+01:00 * kernel: [594849.306789] cdb[0]=0x28: 28 00 00 00 7d 82 00 00 01 00
2019-11-04T16:14:27+01:00 * kernel: [594849.312285] end_request: I/O error, dev synoboot, sector 32130
2019-11-04T16:14:27+01:00 * kernel: [594849.318260] FAT-fs (synoboot2): unable to read boot sector to mark fs as dirty
2019-11-04T16:14:27+01:00 * kernel: [594849.355459] FAT-fs (synoboot2): fat_set_state: set=1 process=updater pid=6414
2019-11-04T16:14:29+01:00 * kernel: [594851.006207] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:29+01:00 * kernel: [594851.015171] cdb[0]=0x2a: 2a 00 00 00 7d 82 00 00 01 00
2019-11-04T16:14:29+01:00 * kernel: [594851.020659] end_request: I/O error, dev synoboot, sector 32130
2019-11-04T16:14:29+01:00 * kernel: [594851.026603] Buffer I/O error on device synoboot2, logical block 0
2019-11-04T16:14:29+01:00 * kernel: [594851.032816] lost page write due to I/O error on synoboot2
2019-11-04T16:14:44+01:00 * kernel: [594866.138511] end_request: I/O error, dev synoboot, sector in range 32768 + 0-2(12)
2019-11-04T16:14:44+01:00 * kernel: [594866.146120] Buffer I/O error on device synoboot2, logical block in range 4096 + 0-2(12)
2019-11-04T16:14:44+01:00 * kernel: [594866.154238] Buffer I/O error on device synoboot2, logical block in range 4096 + 0-2(12)
2019-11-04T16:14:44+01:00 * kernel: [594866.162364] Buffer I/O error on device synoboot2, logical block in range 4096 + 0-2(12)
2019-11-04T16:14:44+01:00 * kernel: [594866.170506] Buffer I/O error on device synoboot2, logical block in range 4096 + 0-2(12)
2019-11-04T16:14:46+01:00 * kernel: [594867.823400] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:54+01:00 * kernel: [594876.197352] FAT-fs (synoboot2): FAT read failed (blocknr 8)
2019-11-04T16:14:56+01:00 * kernel: [594877.848389] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:14:56+01:00 * kernel: [594877.857334] cdb[0]=0x28: 28 00 00 00 7d 8a 00 00 01 00
(Die oberen wiederholen sich viele Male)
2019-11-04T16:39:02+01:00 * kernel: [596322.937828] Result: hostbyte=0x07 driverbyte=0x00
2019-11-04T16:39:02+01:00 * kernel: [596322.946748] cdb[0]=0x28: 28 00 00 00 7d 82 00 00 01 00
2019-11-04T16:39:02+01:00 * kernel: [596322.952229] end_request: I/O error, dev synoboot, sector in range 28672 + 0-2(12)
2019-11-04T16:39:02+01:00 * kernel: [596322.959813] FAT-fs (synoboot2): unable to read boot sector to mark fs as dirty
2019-11-04T16:39:02+01:00 * updater: updater.c:2799 No need to reset reason for v.24922
2019-11-04T16:39:02+01:00 * updater: updater.c:7000 Failed to accomplish the update! (errno = 16)
2019-11-04T16:39:02+01:00 * smallupd@ter: smallupdate.cpp:1139 failed to exec updater -ir
2019-11-04T16:39:02+01:00 * smallupd@ter: smallupdate.cpp:1310 failed to update flash
2019-11-04T16:39:02+01:00 * smallupd@ter: small_update.cpp:20 Failed to apply smallupdate.
2019-11-04T16:39:02+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[6324]: Upgrade.cpp:245 Fail to exec smallupdater
2019-11-04T16:39:02+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9435]: servicecfg_root_object_get.c:115 service config for service [syno_disk_latency_r
ecord_scheduler] is not exist
2019-11-04T16:39:02+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9435]: service_sort_start_list.c:51 SLIBServicecfgInfoGet failed.
2019-11-04T16:39:02+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [ActiveBackup]
2019-11-04T16:39:02+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [ActiveDirectoryServer]
2019-11-04T16:39:03+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [DirectoryServerForWindowsDomain]
2019-11-04T16:39:03+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [PHP5.6]
2019-11-04T16:39:03+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [PHP7.0]
2019-11-04T16:39:03+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [PHP7.2]
2019-11-04T16:39:04+01:00 * synopkg: pkg_pause.cpp:26 Fail to get package info of [SurveillanceStation]
2019-11-04T16:39:04+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9435]: servicecfg_root_object_get.c:115 service config for service [syno_disk_latency_r
ecord_scheduler] is not exist
2019-11-04T16:39:04+01:00 * [596325.143282] init: smbd main process (7773) killed by TERM signal
2019-11-04T16:39:05+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9533]: servicecfg_root_object_get.c:115 service config for service [syno_disk_latency_r
ecord_scheduler] is not exist
2019-11-04T16:39:05+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9533]: service_sort_start_list.c:51 SLIBServicecfgInfoGet failed.
2019-11-04T16:39:07+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9533]: servicecfg_root_object_get.c:115 service config for service [syno_disk_latency_r
ecord_scheduler] is not exist
2019-11-04T16:39:07+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9533]: update_cpputil.cpp:700 synoservice: start all packages ...
2019-11-04T16:39:15+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9533]: update_cpputil.cpp:750 synoservice: finish started all packages
2019-11-04T16:39:15+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9958]: update_cpputil.cpp:700 synoservice: start all packages ...
2019-11-04T16:39:15+01:00 * [596336.311174] init: synopyntlmd main process (9962) terminated with status 1
2019-11-04T16:39:15+01:00 * [596336.318457] init: synopyntlmd main process ended, respawning
2019-11-04T16:39:15+01:00 * [596336.520659] init: synopyntlmd main process (9974) terminated with status 1
2019-11-04T16:39:15+01:00 * [596336.527856] init: synopyntlmd main process ended, respawning
2019-11-04T16:39:15+01:00 * [596336.732285] init: synopyntlmd main process (9980) terminated with status 1
2019-11-04T16:39:15+01:00 * [596336.739463] init: synopyntlmd main process ended, respawning
2019-11-04T16:39:16+01:00 * [596336.943142] init: synopyntlmd main process (9986) terminated with status 1
2019-11-04T16:39:16+01:00 * [596336.950270] init: synopyntlmd main process ended, respawning
2019-11-04T16:39:16+01:00 * [596337.149180] init: synopyntlmd main process (9989) terminated with status 1
2019-11-04T16:39:16+01:00 * [596337.156360] init: synopyntlmd main process ended, respawning
2019-11-04T16:39:16+01:00 * [596337.363026] init: synopyntlmd main process (9996) terminated with status 1
2019-11-04T16:39:16+01:00 * [596337.370344] init: synopyntlmd respawning too fast, stopped
2019-11-04T16:39:21+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[9958]: update_cpputil.cpp:750 synoservice: finish started all packages
2019-11-04T16:39:21+01:00 * synoscgi_SYNO.Core.Upgrade_1_start[6324]: Upgrade.cpp:733 Failed to apply smallupdate
(Hier endet dann das message File)
So wie ich das lese, gibt es Lesefehler im synoboot bzw. synoboot2....
Da ich mich mit Linux eher schlecht als recht rumschlage, habe ich nirgendwo infos darüber gefunden,
was synoboot bzw. synoboot überhaupt ist.
Ist dies die Firmware (bootloader), die fest in der Synology gespeichert ist?
Ist dies ein Bereich auf der Systempartition, die auf allen Laufwerken gespiegelt wird (aber warum zeigt sie dann einen I/O Fehler?)?
Lässt sich der Fehler durch Neuinstallation korrigieren oder ist ein Bauteil auf (ROM) auf der DS defekt und die Hardware muss getauscht werden?
Steht der Fehler überhaupt in einem Zusammenhang mit dem nicht erfolgreichen Update?
Kann mit jemand einen Tipp geben, was ich am besten tun sollte?
