Ergebnis 1 bis 5 von 5
  1. #1
    Anwender
    Registriert seit
    05.11.2009
    Beiträge
    20

    Standard HILFE benötigt....DS409+ Lüftersteurung

    Hallo,

    ich bräuchte Hilfe.

    DS409+ mit DSM 4.2-3259

    Heute fuhr meine alte Kiste in den Hitze-Shutdown...

    Ich hatte da mal vor Jahren in der scemd.xml Sachen verstellt, kann mich nun aber nicht mehr erinnern welche Einstellungen für meine Kiste sind:

    Code:
    <fan_config hw_version="DS409p" period="20" threshold="6" type="DUAL_MODE_HIGH" hibernation_speed="UNKNOWN">
            <temperature fan_speed="LOW"    action="NONE">0</temperature>
            <temperature fan_speed="MIDDLE" action="NONE">42</temperature>
            <temperature fan_speed="FULL"   action="NONE">59</temperature>
            <temperature fan_speed="FULL"   action="SHUTDOWN">64</temperature>
        </fan_config>
        <fan_config hw_version="DS409p" period="20" threshold="6" type="DUAL_MODE_LOW" hibernation_speed="UNKNOWN">
            <temperature fan_speed="LOW"     action="NONE">0</temperature>
            <temperature fan_speed="MIDDLE"  action="NONE">55</temperature>
            <temperature fan_speed="FULL"    action="NONE">59</temperature>
            <temperature fan_speed="FULL"    action="SHUTDOWN">64</temperature>
        </fan_config>
        <fan_config hw_version="DS409pv20" period="20" threshold="6" type="DUAL_MODE_HIGH" hibernation_speed="UNKNOWN">
            <temperature fan_speed="VERY_LOW"   action="NONE">0</temperature>
            <temperature fan_speed="MIDDLE"     action="NONE">42</temperature>
            <temperature fan_speed="HIGH"       action="NONE">48</temperature>
            <temperature fan_speed="ULTRA_HIGH" action="NONE">52</temperature>
            <temperature fan_speed="FULL"       action="SHUTDOWN">56</temperature>
        </fan_config>
        <fan_config hw_version="DS409pv20" period="20" threshold="6" type="DUAL_MODE_LOW" hibernation_speed="UNKNOWN">
            <temperature fan_speed="ULTRA_LOW" action="NONE">0</temperature>
            <temperature fan_speed="VERY_LOW"  action="NONE">42</temperature>
            <temperature fan_speed="LOW"       action="NONE">50</temperature>
            <temperature fan_speed="FULL"      action="SHUTDOWN">56</temperature>
        </fan_config>
    Ich denke es sind die "DS409pv20", da der Shutdown bei 56°C war.

    Was bedeutet aber hier:

    "DUAL_MODE_LOW"
    "DUAL_MODE_HIGH"

    und verwendet meine Kiste LOW/MIDDLE/FULL oder die anderen Einstellungen.

    Es kann sein, dass ich das damals total verhunzt habe und würde mich freuen es nun wieder richtig zu machen.

    Vielen Dank für Eure Hilfe.
    Geändert von goetz (14.06.2019 um 16:42 Uhr) Grund: QUOTE -> CODE

  2. #2
    Moderator
    Registriert seit
    18.03.2009
    Beiträge
    13.249

    Standard

    Hallo,
    das sind die originalen Zeilen, habe ich gerade aus dem .pat extrahiert und verglichen. Stammt der Code aus /usr/sysno/etc oder /usr/syno/etc.default?

    Gruß Götz
    DS1513+ / DSM 6.2 / 3x 2TB Samsung HD204UI
    DS916+ / DSM 6.1.7 / 3x 4TB HGST MegaScale DC 4000.B
    DS213+ / DSM 6.2 / 2x 2TB Seagate Constellation ES
    eTrayZ / Samsung HD103SI
    APC SMT750I+AP9631

  3. #3
    Anwender
    Registriert seit
    05.11.2009
    Beiträge
    20

    Standard

    Hallo Götz dies hier ist die

    /usr/syno/etc.defaults/scemd.xml

    Code:
    Synology> dd bs=32k count=1 if='/usr/syno/etc.defaults/scemd.xml' skip=0
    
    <?xml version="1.0" encoding="UTF-8"?>
    <scemd>
    
        <fan_config hw_version="DS409p" period="20" threshold="6" type="DUAL_MODE_HIGH" hibernation_speed="UNKNOWN">
            <temperature fan_speed="LOW"    action="NONE">0</temperature>
            <temperature fan_speed="MIDDLE" action="NONE">42</temperature>
            <temperature fan_speed="FULL"   action="NONE">59</temperature>
            <temperature fan_speed="FULL"   action="SHUTDOWN">64</temperature>
        </fan_config>
        <fan_config hw_version="DS409p" period="20" threshold="6" type="DUAL_MODE_LOW" hibernation_speed="UNKNOWN">
            <temperature fan_speed="LOW"     action="NONE">0</temperature>
            <temperature fan_speed="MIDDLE"  action="NONE">55</temperature>
            <temperature fan_speed="FULL"    action="NONE">59</temperature>
            <temperature fan_speed="FULL"    action="SHUTDOWN">64</temperature>
        </fan_config>
        <fan_config hw_version="DS409pv20" period="20" threshold="6" type="DUAL_MODE_HIGH" hibernation_speed="UNKNOWN">
            <temperature fan_speed="VERY_LOW"   action="NONE">0</temperature>
            <temperature fan_speed="MIDDLE"     action="NONE">42</temperature>
            <temperature fan_speed="HIGH"       action="NONE">48</temperature>
            <temperature fan_speed="ULTRA_HIGH" action="NONE">52</temperature>
            <temperature fan_speed="FULL"       action="SHUTDOWN">56</temperature>
        </fan_config>
        <fan_config hw_version="DS409pv20" period="20" threshold="6" type="DUAL_MODE_LOW" hibernation_speed="UNKNOWN">
            <temperature fan_speed="ULTRA_LOW" action="NONE">0</temperature>
            <temperature fan_speed="VERY_LOW"  action="NONE">42</temperature>
            <temperature fan_speed="LOW"       action="NONE">50</temperature>
            <temperature fan_speed="FULL"      action="SHUTDOWN">56</temperature>
        </fan_config>
    
    <fan_config hw_version="Synology-DX5" period="20" threshold="6" type="DUAL_MODE_HIGH_EBOX" hibernation_speed="FULL">
        <disk_temperature fan_speed="FULL" action="NONE">0</disk_temperature>
        <disk_temperature fan_speed="FULL" action="NONE">45</disk_temperature>
        <disk_temperature fan_speed="FULL" action="NONE">55</disk_temperature>
        <disk_temperature fan_speed="FULL" action="SHUTDOWN">61</disk_temperature>
    </fan_config>
    
    <fan_config hw_version="Synology-DX5" period="20" threshold="6" type="DUAL_MODE_LOW_EBOX" hibernation_speed="FULL">
        <disk_temperature fan_speed="FULL" action="NONE">0</disk_temperature>
        <disk_temperature fan_speed="FULL" action="NONE">45</disk_temperature>
        <disk_temperature fan_speed="FULL" action="NONE">55</disk_temperature>
        <disk_temperature fan_speed="FULL" action="SHUTDOWN">61</disk_temperature>
    </fan_config>
    
    <fan_config hw_version="Synology-DX510" period="20" threshold="6" type="DUAL_MODE_HIGH_EBOX" hibernation_speed="LOW">
        <disk_temperature fan_speed="MIDDLE" action="NONE">0</disk_temperature>
        <disk_temperature fan_speed="HIGH"   action="NONE">48</disk_temperature>
        <disk_temperature fan_speed="FULL"   action="SHUTDOWN">61</disk_temperature>
    </fan_config>
    
    <fan_config hw_version="Synology-DX510" period="20" threshold="6" type="DUAL_MODE_LOW_EBOX" hibernation_speed="LOW">
        <disk_temperature fan_speed="MIDDLE" action="NONE">0</disk_temperature>
        <disk_temperature fan_speed="HIGH"   action="NONE">48</disk_temperature>
        <disk_temperature fan_speed="FULL"   action="SHUTDOWN">61</disk_temperature>
    </fan_config>
    
    <fan_config hw_version="Synology-DX1211" period="300" threshold="2" type="DUAL_MODE_HIGH_EBOX" hibernation_speed="LOW">
        <disk_temperature fan_speed="LOW" action="NONE">0</disk_temperature>
        <disk_temperature fan_speed="MIDDLE" action="NONE">48</disk_temperature>
        <disk_temperature fan_speed="HIGH"   action="NONE">58</disk_temperature>
        <disk_temperature fan_speed="FULL"   action="SHUTDOWN">61</disk_temperature>
    </fan_config>
    
    <fan_config hw_version="Synology-DX1211" period="300" threshold="2" type="DUAL_MODE_LOW_EBOX" hibernation_speed="LOW">
        <disk_temperature fan_speed="LOW" action="NONE">0</disk_temperature>
        <disk_temperature fan_speed="MIDDLE" action="NONE">48</disk_temperature>
        <disk_temperature fan_speed="HIGH"   action="NONE">58</disk_temperature>
        <disk_temperature fan_speed="FULL"   action="SHUTDOWN">61</disk_temperature>
    </fan_config>
    
    <fan_config hw_version="Synology-RX1211" period="300" threshold="2" type="DUAL_MODE_HIGH_EBOX" hibernation_speed="LOW">
        <disk_temperature fan_speed="MIDDLE" action="NONE">0</disk_temperature>
        <disk_temperature fan_speed="MIDDLE" action="NONE">45</disk_temperature>
        <disk_temperature fan_speed="FULL"   action="NONE">52</disk_temperature>
        <disk_temperature fan_speed="FULL"   action="SHUTDOWN">61</disk_temperature>
    </fan_config>
    
    </disk_control>
    
    </scemd>

    Dies hier ist /usr/syno/etc/

    Code:
    Synology> dd bs=32k count=1 if='/usr/syno/etc/scemd.xml' skip=0
    
    <?xml version="1.0" encoding="UTF-8"?>
    <scemd>
    
        <fan_config hw_version="DS409p" period="20" threshold="6" type="DUAL_MODE_HIGH" hibernation_speed="UNKNOWN">
            <temperature fan_speed="LOW"    action="NONE">0</temperature>
            <temperature fan_speed="MIDDLE" action="NONE">42</temperature>
            <temperature fan_speed="FULL"   action="NONE">59</temperature>
            <temperature fan_speed="FULL"   action="SHUTDOWN">64</temperature>
        </fan_config>
        <fan_config hw_version="DS409p" period="20" threshold="6" type="DUAL_MODE_LOW" hibernation_speed="UNKNOWN">
            <temperature fan_speed="LOW"     action="NONE">0</temperature>
            <temperature fan_speed="MIDDLE"  action="NONE">55</temperature>
            <temperature fan_speed="FULL"    action="NONE">59</temperature>
            <temperature fan_speed="FULL"    action="SHUTDOWN">64</temperature>
        </fan_config>
        <fan_config hw_version="DS409pv20" period="20" threshold="6" type="DUAL_MODE_HIGH" hibernation_speed="UNKNOWN">
            <temperature fan_speed="VERY_LOW"   action="NONE">0</temperature>
            <temperature fan_speed="MIDDLE"     action="NONE">42</temperature>
            <temperature fan_speed="HIGH"       action="NONE">48</temperature>
            <temperature fan_speed="ULTRA_HIGH" action="NONE">52</temperature>
            <temperature fan_speed="FULL"       action="SHUTDOWN">56</temperature>
        </fan_config>
        <fan_config hw_version="DS409pv20" period="20" threshold="6" type="DUAL_MODE_LOW" hibernation_speed="UNKNOWN">
            <temperature fan_speed="ULTRA_LOW" action="NONE">0</temperature>
            <temperature fan_speed="VERY_LOW"  action="NONE">42</temperature>
            <temperature fan_speed="LOW"       action="NONE">50</temperature>
            <temperature fan_speed="FULL"      action="SHUTDOWN">56</temperature>
        </fan_config>
    </scemd>
    Geändert von goetz (14.06.2019 um 22:13 Uhr) Grund: QUOTE gegen CODE Tag getauscht.

  4. #4
    Anwender
    Registriert seit
    05.11.2009
    Beiträge
    20

    Standard

    Welche Datei ist die, die auch verwendet wird, das wird unterschiedlich gesehen in den Foren......
    Geändert von clueck (14.06.2019 um 17:19 Uhr)

  5. #5
    Moderator
    Registriert seit
    18.03.2009
    Beiträge
    13.249

    Standard

    Hallo,
    zieh Dir https://global.download.synology.com...ld_number=3259
    und entpacke es mit 7zip (hda1), da findest Du die originalen Versionen.

    Gruß Götz

    PS:wenn Du Code postest so klick beim Antworten auf Erweitert und nutze CODE Tags (Button <#>)
    DS1513+ / DSM 6.2 / 3x 2TB Samsung HD204UI
    DS916+ / DSM 6.1.7 / 3x 4TB HGST MegaScale DC 4000.B
    DS213+ / DSM 6.2 / 2x 2TB Seagate Constellation ES
    eTrayZ / Samsung HD103SI
    APC SMT750I+AP9631

Ähnliche Themen

  1. Welche Außenkamera? Hilfe benötigt
    Von 00eraser00 im Forum Surveillance Station
    Antworten: 11
    Letzter Beitrag: 04.03.2014, 13:19
  2. Newbie - benötigt Eure Hilfe
    Von Jimmy-Bondy im Forum Raid Konfiguration
    Antworten: 6
    Letzter Beitrag: 12.12.2013, 21:12
  3. Hilfe zu TT-Connect S2-4600 benötigt
    Von fs1958 im Forum Video Station
    Antworten: 9
    Letzter Beitrag: 18.11.2013, 14:07
  4. Mal wieder Hilfe benötigt.
    Von genesis im Forum Kaufberatung - Fragen vor dem Kauf
    Antworten: 9
    Letzter Beitrag: 29.11.2010, 22:51
  5. Anfängerin benötigt Hilfe :-)
    Von Vanilla im Forum Kaufberatung - Fragen vor dem Kauf
    Antworten: 5
    Letzter Beitrag: 24.11.2010, 17:25

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •