Platten-Power-Management

Status
Für weitere Antworten geschlossen.

itari

Benutzer
Mitglied seit
15. Mai 2008
Beiträge
21.900
Punkte für Reaktionen
14
Punkte
0
Hab gerade mal in einem Seagate-Manual Erläuterungen zum Platten-Power-Management gefunden, die vielleicht ganz interessant sind:

Power-management modes
The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes:
Rich (BBCode):
Power modes        Heads       Spindle        Buffer        Avg Watts*
Active             Tracking    Rotating       Enabled         11
Idle               Tracking    Rotating       Enabled          8
Standby            Parked      Stopped        Enabled          1
Sleep              Parked      Stopped        Disabled         1

* Beispiel-Werte für eine Seagate Barracuda 7200.11
Active mode
The drive is in Active mode during the read/write and seek operations.

Idle mode
The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc access is necessary.

Standby mode
The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In Standby mode, the drive buffer is enabled, the heads are parked and the spindle is at rest. The drive accepts all commands and returns to Active mode any time disc access is necessary.

Sleep mode
The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buffer is disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and enters Standby mode with all current translation parameters intact.

Idle and Standby timers
Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins counting down from its specified delay times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary.

itari
 
Status
Für weitere Antworten geschlossen.
 

Kaffeautomat

Wenn du das Forum hilfreich findest oder uns unterstützen möchtest, dann gib uns doch einfach einen Kaffee aus.

Als Dankeschön schalten wir deinen Account werbefrei.

:coffee:

Hier gehts zum Kaffeeautomat