Hallo,
meine Konfiguration ist etwas ungewöhnlich: 3 Platten (1.5 TB, 1TB, 500GB)
NAS> cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md2 : active raid1 sdb5[0] sda6[1]
972028732 blocks super 1.1 [2/2] [UU]
md3 : active raid1 sdc5[0] sda5[1]
483652732 blocks super 1.1 [2/2] [UU]
md1 : active raid1 sda2[0] sdb2[1] sdc2[2]
2097088 blocks [4/3] [UUU_]
md0 : active raid1 sda1[0] sdb1[1] sdc1[2]
2490176 blocks [4/3] [UUU_]
unused devices: <none>
Das Problem ist, dass die Konfiguration nach dem Booten verloren geht und im Speicher-Manager auch nicht korrekt dargestellt wird.
Kennt jemand die (inoffiziellen) Parameter vom "spacetool" und deren Bedeutung?
im Forum habe ich beispielsweise vom Parameter --synoblock-enum gelesen.
Wie kann ich die "syno-Blöcke" verändern?
Vielen Dank,
Daniel
meine Konfiguration ist etwas ungewöhnlich: 3 Platten (1.5 TB, 1TB, 500GB)
NAS> cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md2 : active raid1 sdb5[0] sda6[1]
972028732 blocks super 1.1 [2/2] [UU]
md3 : active raid1 sdc5[0] sda5[1]
483652732 blocks super 1.1 [2/2] [UU]
md1 : active raid1 sda2[0] sdb2[1] sdc2[2]
2097088 blocks [4/3] [UUU_]
md0 : active raid1 sda1[0] sdb1[1] sdc1[2]
2490176 blocks [4/3] [UUU_]
unused devices: <none>
Das Problem ist, dass die Konfiguration nach dem Booten verloren geht und im Speicher-Manager auch nicht korrekt dargestellt wird.
Kennt jemand die (inoffiziellen) Parameter vom "spacetool" und deren Bedeutung?
im Forum habe ich beispielsweise vom Parameter --synoblock-enum gelesen.
Wie kann ich die "syno-Blöcke" verändern?
Vielen Dank,
Daniel