Oct 16 10:31:04 kernel: ide0: reset phy, status=0x00000113, siimage_reset
Oct 16 10:31:04 kernel: hda: SAMSUNG HD501LJ, ATA DISK drive
Oct 16 10:31:04 kernel: blk: queue c0226e90, I/O limit 4095Mb (mask 0xffffffff)
Oct 16 10:31:04 kernel: ide1: reset phy, status=0x00000000, siimage_reset
Oct 16 10:31:04 kernel: ide1: reset phy dead, status=0x00000000
Oct 16 10:31:04 kernel: siimage_reset: no drive on ide1.
Oct 16 10:31:04 kernel: ide0 at 0xc5000e80-0xc5000e87,0xc5000e8a on irq 16
Oct 16 10:31:04 kernel: ide1 at 0xc5000ec0-0xc5000ec7,0xc5000eca on irq 16
Oct 16 10:31:04 kernel: ide2: DISABLED, NO IRQ
Oct 16 10:31:04 kernel: ide3: DISABLED, NO IRQ
Oct 16 10:31:04 kernel: 4: DISABLED, NO IRQ
Oct 16 10:31:04 kernel: ide5: DISABLED, NO IRQ
Oct 16 10:31:04 kernel: ide6: DISABLED, NO IRQ
Oct 16 10:31:04 kernel: ide7: DISABLED, NO IRQ
Oct 16 10:31:04 kernel: hda: attached ide-disk driver.
Oct 16 10:31:04 kernel: hda: host protected area => 1
Oct 16 10:31:04 kernel: VFS: Mounted root (ext2 filesystem).
Oct 16 10:31:04 kernel: i2c-ppc.c(mpc_i2c_init)(235) i2c_base = fc003000
Oct 16 10:31:04 kernel: synobios: unload
Oct 16 10:31:04 kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 16 10:31:04 kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 16 10:31:04 kernel: VFS: Mounted root (ext3 filesystem).
Oct 16 10:31:04 kernel: sk98lin: Network Device Driver v8.41.2.3
Oct 16 10:31:04 kernel: (C)Copyright 1999-2006 Marvell(R).
Oct 16 10:31:04 kernel: eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
Oct 16 10:31:04 kernel: PrefPort:A RlmtMode:Check Link State
Oct 16 10:31:04 kernel: i2c-ppc.c(mpc_i2c_init)(235) i2c_base = fc003000
Oct 16 10:31:05 kernel: eth0: network connection up using port A
Oct 16 10:31:05 kernel: speed: 100
Oct 16 10:31:05 kernel: autonegotiation: yes
Oct 16 10:31:05 kernel: duplex mode: full
Oct 16 10:31:05 kernel: flowctrl: none
Oct 16 10:31:05 kernel: irq moderation: disabled
Oct 16 10:31:05 kernel: scatter-gather: enabled
Oct 16 10:31:05 kernel: tx-checksum: enabled
Oct 16 10:31:05 kernel: rx-checksum: enabled
Oct 16 10:31:05 kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 16 10:35:32 kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Oct 16 10:35:35 scemd: modules/disk_hibernation.c:79 Force hibernation enable, idle minutes 30
Oct 16 10:35:35 synousbdisk: RCClean succeeded
Oct 16 10:35:37 ddnsd: main(ddnsd.c:1729): not enable DDNS, shutdown daemon
Oct 16 10:35:42 load [local] UPDATE: trigger.c (97) Failed to attach shared memory.
Oct 16 10:35:42 load [local] UPDATE: trigger.c (97) Failed to attach shared memory.
Oct 16 10:35:42 load [local] UPDATE: trigger.c (97) Failed to attach shared memory.
Oct 16 10:35:43 load [local] UPDATE: trigger.c (97) Failed to attach shared memory.
Oct 16 10:35:43 load [local] UPDATE: trigger.c (97) Failed to attach shared memory.
Oct 16 10:35:43 kernel: PCI: 00:0e.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
Oct 16 10:35:43 kernel: PCI: 00:0e.2 PCI cache line size corrected to 32.
Oct 16 10:35:43 kernel: USB_DEVICE: This is hub. No need to call_policy_interface.
Oct 16 10:35:43 kernel: USB_DEVICE: This is hub. No need to call_policy_interface.
Oct 16 10:35:43 kernel: USB_DEVICE: This is hub. No need to call_policy_interface.
Oct 16 10:35:48 dms: _ReloadSetting(98) Buffer size [] is a wrong value and consider default buffer size: 8192
Oct 16 10:35:49 synorcd: hw_raytac.c (126) failed to open /dev/usb/hiddev5 (No such device).